Description

My first PC build. The main things I was aiming to do with it are gaming and photo editing (Adobe Lightroom & Photoshop) followed by general pc use and software development (maybe running an Ubuntu VM if I decide not to dual boot). My plan is to upgrade my monitor to a curved ultra wide but I'm probably going to wait for the HDR curves to come out.

Comments

  • 29 months ago
  • 47 points

WOOD you look at this

All seriousness, clean build mate ! +1

  • 29 months ago
  • 8 points

Upvote for puns.

  • 25 months ago
  • 2 points

Should I buy a 1080 Ti? I've got a 1060 at the moment mate.

  • 25 months ago
  • 3 points

If you want 1440p 144hz or 4k 60fps then i would, but for 1080p its overkill

  • 29 months ago
  • 11 points

Your setup gave me wood. plus one.

  • 29 months ago
  • 4 points

waaaaaaaaaaaaaoooooooooooooooooow. Simple, powerful, and clean; all you can ask for. +1

  • 29 months ago
  • 2 points

Thanks

  • 29 months ago
  • 4 points

the contrass is next level\

  • 29 months ago
  • 2 points

Thanks

  • 29 months ago
  • 3 points

Stunning display. Inwin looks like it might have cases with wood on them soon. Maybe keep an eye out for them ;)

  • 29 months ago
  • 1 point

Yeah I saw those the other day on HardwareCanucks. A little too late now though as I'm probably not going to rebuild.

  • 29 months ago
  • 3 points

Love the build, basically my dream build. Link to the wallaper and other like that one?

  • 29 months ago
  • 1 point

Thanks. Here is the wallpaper: https://free4kwallpapers.com/no-watermarks/originals/2015/07/15/minimalist-deer.jpg

I found it originally by googling "minimalist wallpaper"

  • 29 months ago
  • 3 points

+1 Well done Sir. RBGs but tasteful, indeed a rare sight.

  • 29 months ago
  • 1 point

Thanks and I agree. I think if you are careful RGB is a great way to breath new life into a setup and even an entire room that would normally require an expensive rebuild/redesign.

  • 29 months ago
  • 3 points

Wow, that's a stunning setup!

  • 29 months ago
  • 1 point

Thanks

  • 29 months ago
  • 3 points

Nice! Love your build!

  • 29 months ago
  • 1 point

Thanks

  • 29 months ago
  • 3 points

+1 for the wooden keyboard rest, makes it feel classy

This is a great build

  • 29 months ago
  • 1 point

Thanks. I got the keyboard rest from massdrop if anyone is interested. It's the NPKC Wooden Wrist Rest https://www.massdrop.com/buy/36602

  • 29 months ago
  • 1 point

Dang, I have to be a member to look at the products, but thanks for showing me

  • 29 months ago
  • 3 points

Wow, how can your first build be so clean and sleek?!! Do you have any resource( a YouTube video guide or something similar) that you used to build your computer?

  • 29 months ago
  • 2 points

I watched some videos of builds using this case (usually reviews). Some from bigger YouTubers like HardwareCanucks and BitWit, others from people just posting about their build. There are a few videos I found where the person recorded their entire S340 elite build which was helpful. Another very helpful thing I did was find pictures of peoples builds here on PCPartPicker where they used the same parts to see how they wired things.

  • 29 months ago
  • 1 point

Oh thanks! I guess I should check those out for my first build too.

  • 29 months ago
  • 2 points

great build and amazing setup dude! +1!

  • 29 months ago
  • 1 point

Thanks

  • 29 months ago
  • 2 points

This is super clean! I love it. +1

  • 29 months ago
  • 1 point

Thanks

  • 29 months ago
  • 2 points

Love the look +1

  • 29 months ago
  • 2 points

Thanks

  • 29 months ago
  • 2 points

I'm not into wood setups, but ur setup looks really nice :D great job. Maybe consider drewing a hole for the keyboard cable.

  • 29 months ago
  • 1 point

Thanks. I just can't bring myself to put a hole in the desk. I'm hoping that when I upgrade my monitor I can do something about that cable then.

  • 29 months ago
  • 2 points

AWESOME MAN!!!!!! This pc is so peacfull!

  • 29 months ago
  • 0 points

Thanks

  • 29 months ago
  • 2 points

Very nice setup. I've got a question regarding GPU temps. I'm running a similar setup but with an Asus GTX 1080TI OC 11GB. The card is running very hot way above 70°C. I also have almost no air traveling through the radiator of the Kraken X62.

How do you keep your card cool?

Thanks

  • 25 months ago
  • 2 points

My wife always find it funny when I refer to things like this as sexy. But man, that computer, plus the wood accent looks really sexy. Clean looking, refreshing looking, and well as I said just down right sexy. As sexy as an inanimate object can be ;). I bet it also is a beast when it comes to playing games as well.

How are you enjoying the MOBO? I am looking to build a computer almost exactly the same specs. Going to throw it into a Phanteks - Enthoo Pro ATX Full Tower Case though. My only concern is that people say this MOBO is just an entry level board.

  • 25 months ago
  • 1 point

MOBO has worked great. Maybe there are more advanced custom settings that other boards can do that this one can't but I haven't needed them. Keep in mind that this was my first build I probably don't even know about those settings. From my research, this board had consistently good reviews, it met the aesthetic I was going for, and it had all the expansion slots I was I wanted to have.

  • 10 months ago
  • 2 points

that's a lotta WOOD! +1

  • 29 months ago
  • 1 point

I love everything about this build! Which camera did you use?

  • 29 months ago
  • 2 points

Thanks. The camera was a Nikon D810 using three lenses. The Nikon 85mm f1.4, Nikon 14-24 F2.8 and the Nikone 50mm f1.8.

  • 29 months ago
  • 2 points

I appreciate you taking proper photos. People spend $4,000 on a computer and can't be bothered to hold their iPhone still when they take a photo!

  • 29 months ago
  • 1 point

Great looking setup. Get some cable combs for those gpu and psu cables! Such a well taken care of setup deserves those combs!

  • 29 months ago
  • 1 point

Good idea, I didn't know about those. I'll look into them.

  • 29 months ago
  • 1 point

They're just little things but they go a long way to keep your build looking tidy. Check out my builds if you want to see how they look. I use different kinds on each one.

  • 29 months ago
  • 1 point

Nice clean beautiful setup!

  • 29 months ago
  • 1 point

Thanks

  • 29 months ago
  • 1 point

I envy your neatness...

  • 29 months ago
  • 1 point

Haha, some of that neatness may have come from taking the photos.

  • 29 months ago
  • 1 point

Looks awesome!

  • 29 months ago
  • 1 point

Thanks

  • 29 months ago
  • 1 point

i adore your setup..nice ! +1

  • 29 months ago
  • 1 point

Thanks

  • 29 months ago
  • 1 point

HOW ARE THE TEMPS

  • 29 months ago
  • 1 point

I don't check the temps that much but I haven't run into any issues there yet. We'll see what happens when I upgrade to a higher resolution monitor later on.

  • 29 months ago
  • 1 point

Aesthetically pleasing :)

  • 29 months ago
  • 1 point

Thanks

  • 29 months ago
  • 1 point

Did you make the wrist rest?

  • 29 months ago
  • 2 points

Nope, I happened to find the wrist rest on massdrop. It's a NPKC Wooden Wrist Rests https://www.massdrop.com/buy/36602. It was hard to find them elsewhere so that is where I got it. I think you can find some on Amazon though.

[comment deleted by staff]
  • 29 months ago
  • 1 point

Hey just a question; I'm looking at closed loop cooling, and I was wondering why you chose the NZXT Kraken over a Corsair Hydro or similarly priced one. How happy are you with its performance? So far has it been worth the cash? I heard that Corsair has better quality control and possibly better or equal performance. It does look damn good with that infinity mirror though.

  • 29 months ago
  • 1 point

So honestly the number one reason why I chose the Kraken is because it just looks really really good. That said, from all the research I did before buying, people seemed to be happy with it and the performance was also quite good from reviewer benchmarks. So far, I think its great. No temp issues, not crazy loud, and it's probably the best looking closed loop cooling system available today.

[comment deleted by staff]
  • 29 months ago
  • 1 point

EXCELLENT overall look and match of that setup, no pimp or extras needed, I just wished the case was black to pop those yellow/wood tones more, but nicely done indeed, cheers! SUperb great job for a first time, EnJoY!!

  • 29 months ago
  • 1 point

I really love the rustic vibe your build is giving off! Speaking of which, have you heard of the wood cases In-Win was demoing at Computex? I think one of those would look really good here!

  • 29 months ago
  • 1 point

Thanks. Yeah I saw those a couple days ago and thought they would work great here. I don't see myself rebuilding at this point though.

  • 29 months ago
  • 1 point

Get some cable combs and that will be one of the cleanest builds I have seen. Really nice!

  • 29 months ago
  • 2 points

Someone mentioned that and I didn't know about them. I'm going to be getting some though.

  • 29 months ago
  • 1 point

Looks amazing and super clean! Well done! :)

  • 29 months ago
  • 1 point

Thanks

  • 29 months ago
  • 1 point

I got wood, but seriously. Why does everything here look so organic! 1+

  • 29 months ago
  • 1 point

Any chance you would post a pic of inside the window at where you put the LED Strip? I absolutely love this case and your design choice!

  • 29 months ago
  • 1 point
  • 29 months ago
  • 1 point

thanks!!

  • 29 months ago
  • 1 point

Omg

  • 29 months ago
  • 1 point

100th +1

aye B)

  • 29 months ago
  • 1 point

getting the same case, noob question. What is the point of getting two different sized nzxt case fans?

  • 29 months ago
  • 1 point

I got the 140mm to allow moving as much air as possible. My assumption is that the more air moved supports better thermals.

  • 29 months ago
  • 1 point

Hey! Beautiful build! Quick question tho! What's the monitor you've got???

  • 29 months ago
  • 1 point

It's a Dell u2414h

  • 29 months ago
  • 1 point

Gorgeous build, and love the minimal RGB lighting. Combing through everyone's builds as I'm getting ready to pull the trigger on component orders myself.

  • 29 months ago
  • 1 point

May I ask what LED strips are used to light up the behind of the desk?

  • 29 months ago
  • 1 point

Thanks

  • 28 months ago
  • 1 point

Awesome!

  • 28 months ago
  • 1 point

I am going to attempt my first build in about 2 weeks. I love yours!!! I love this case and I have seen 120mm in other builds and 2-4 fans. Why only two and why 120 and 140mm? Thanks for sharing your build!!!

  • 28 months ago
  • 1 point

Thanks. The top fan area can take a 140mm so I added it to get a bit more airflow. I have no idea how to fit more exhaust fans into the case. Definitely not sure how anyone got more than 2.

  • 27 months ago
  • 1 point

I know this using super old, but I just wanted to ask a question in hopes you would answer. I'm building a very similar build, and I can't seem to find solid white cables for the EVGA PSU. Did your c series cables work ok with your e series PSU?

  • 27 months ago
  • 1 point

Working great so far.

  • 27 months ago
  • 1 point

Beautiful themed setup +1

  • 27 months ago
  • 1 point

Insanely great and clean looking. Wow

  • 26 months ago
  • 1 point

Awesome build man. Can you tell me what strip lighting your using? I love the effect!

  • 26 months ago
  • 1 point

Thanks, it's the Philips Hue 2nd Gen Light Strip.

  • 26 months ago
  • 1 point

hey did you have to get the internal usb hub because of the kraken ? does the kraken need a usb 2.0 port or something?

  • 26 months ago
  • 1 point

If I recall the main benefit of the internal USB was for the for the lighting.

  • 26 months ago
  • 2 points

thanks for the reply! I'm going to copy your build lol hope that is okay!

  • 26 months ago
  • 1 point

how did you hook up the nzxt water cooling system on your asus mobo? doesn't it require 2.0 usb?

  • 26 months ago
  • 1 point

I honestly don't recall. Runs great though, no issues thus far.

  • 25 months ago
  • 1 point

Is the top fan mount on the S340 Elite 120mm or 140mm?

  • 25 months ago
  • 1 point

It's a 140mm.

  • 25 months ago
  • 1 point

Thanks for the response.

  • 25 months ago
  • 1 point

How does the G403 perform? +1 BTW

  • 25 months ago
  • 1 point

Works great and feels great, no noticeable issues from me. Keep in mind I don't game competitively but I've heard good things from reviewers who do.

  • 24 months ago
  • 1 point

Holy... By the what, what monitor are you using?

  • 24 months ago
  • 1 point

Dell u2414h

  • 24 months ago
  • 1 point

Im very inspired by this for my first build. I have a few questions, first what kind of lights are those behind your desk? And second, does this case come with the white bottom bar as shown in yours? The pics on this site only show all black.

  • 23 months ago
  • 1 point

The lights on the desk are Philips Hue lightstrips. For the S340 Elite case the bottom bar is white on the website ... unless something changed.

  • 23 months ago
  • 1 point

Damn that's a pretty build. I smell a Setup Wars seal of approval coming.

  • 23 months ago
  • 1 point

awesome, awesome build and setup, I'm in awe! Did you make that wrist rest or are the available online? Also, would you recommend the aer rgb fan; I am getting a hue plus so I am wondering if it is worth it to get a glowy boi fan

  • 22 months ago
  • 1 point

I got the wrist rest from Massdrop here https://www.massdrop.com/buy/36602. You don't need the fan, personally I like it since it adds to the look. At the end of the day though, it's all about the appearance. I think the it looks more complete with the fans.

  • 22 months ago
  • 1 point

I have a question, what tabletop or countertop are you using?

  • 22 months ago
  • 1 point

It's the maple top for the Uplift desk. https://www.upliftdesk.com/

  • 22 months ago
  • 1 point

thank you. if I'm being honest I did not think that you would respond. you have a very nice build here, an an amazing setup.

  • 21 months ago
  • 1 point

Would using the kraken, hue and front panel usb 2.0 connectors need three 2.0 headers on the motherboard?

  • 21 months ago
  • 1 point

I don't recall exactly but I do recall that I needed the usb hub.

  • 20 months ago
  • 1 point

Wow. This is the cleanest build I have seen.

Absolutely perfect!

  • 20 months ago
  • 1 point

I keep seeing a lot of similar builds where everyone is using some variation of the 850 Evo. I plan on using the 960 Evo m.2, what's your opinion on the 850 EVO? Is it worth having both the 850 and 960 SSDs on top of a 3 TB Seagate HDD?

Incredible build too! +1 OP

  • 20 months ago
  • 1 point

I was thinking on going with an m.2 drive too but from what I was reading it seemed like performance gains would be essentially imperceptible unless you are doing huge reads/writes (like editing a lot of 4k video). For my use cases (photo editing, gaming, development, general computer usage) it just didn't seem worth the extra cost. This isn't from experience, however, just from the benchmark comparison that I read at the time.

  • 20 months ago
  • 1 point

So if I'm doing a little bit of editing in 4K, the 850 should suffice then. Sounds good to me man, thanks for your input.

One final question, what other programs require huge reads/writes (would Solidworks/Autodesk Inventor fall under this?)

  • 20 months ago
  • 1 point

I'm not too familiar with those applications so I can't say for sure. Anything where you are pushing around gb's of data the m.2 should help. If it is only every now and then though, it probably isn't worth the cash.

  • 19 months ago
  • 1 point

Hi, do you have a video while building this?

  • 19 months ago
  • 1 point

No. I did have some youtube videos of other people building in the case that I used for reference though.

https://www.youtube.com/watch?v=LDiREh1lpvs

https://www.youtube.com/watch?v=XBHRDuUHe4s

  • 17 months ago
  • 1 point

if you dont mind me asking what desk or table top do you have and how big is it ?

  • 17 months ago
  • 1 point

It's an Uplift desk, 80" x 30" with a maple top.

  • 17 months ago
  • 1 point

Thank you so much for letting me know :D im in the process of building one as well !

  • 16 months ago
  • 1 point

This is absolutely gorgeous! Also your first build...just wow.

I’ve just decided I want to build my first pc, how hard was actually putting it all together after you had all the pieces? It’s a little daunting.

  • 16 months ago
  • 1 point

Thanks. It was that hard to do. I just took my time. Watching other people assemble machines was quite helpful and YouTube is full of those. Looking at reviews would also help since reviewers sometimes include installation in the review.

  • 16 months ago
  • 1 point

what is the lighting setup for this?

  • 16 months ago
  • 1 point

Interior lights are the NZXT Hue+ and lights on the desk are Philips Hue Lightstrips

  • 15 months ago
  • 1 point

Perfect amount of RGB, you don't see that often

  • 15 months ago
  • 1 point

Hi, what lamp is that? and what's that white object underneath it? Beautiful build (:

  • 15 months ago
  • 1 point

Thanks. The lamp is called the Fade lamp from http://fadestudio.com/. If by white object you mean the little thing on the edge of the desk that is one of clasps from the foot hammock.

  • 14 months ago
  • 1 point

What's that monitor there? Nice Wood touch to your setup.

  • 14 months ago
  • 1 point

It's an older dell ultrasharp. I have replaced it with an Ultrawide now.

  • 13 months ago
  • 1 point

What ultrawide monitor you got rn?

  • 13 months ago
  • 1 point

The Alienware x34

  • 13 months ago
  • 1 point

Got pic of it with your setup?

  • 11 months ago
  • 1 point

is the mouse rgb?

  • 11 months ago
  • 1 point
  • 7 months ago
  • 1 point

beautiful and clean build

[comment deleted by staff]
[comment deleted by staff]
[comment deleted]