Description

Hey guys this is my revised build, New things: Added another 980Ti with waterblock and backplate, Swaped cables with new CableMod Graphite cables, MNPCtech custom Stealth BILLET Cable Combs and added two Dell Ultrasharp U2415 1920x1200 monitors and rested all the monitors on a Ergotech Triple Monitor Desk Stand.

As of right now I decided to go with a second 980Ti over a GTX1080 because I really did not feel for the price jump my performance gain would not be that significant. I was able to pick up this 980Ti, water-block and back-plate for $400 on Ebay. Once the additional card came in with the new cables and fittings I drained the loop, added the card and filled her back up with fresh fluid. (Still a complete pain in the ***)

I will admit that the 980Ti SLI is not quite what I had in mind at first, some games get very angry in SLI and for the first few days I was experiencing crashing in almost every game. After a few days I believe I got it all sorted out and its running quite well. The games that support SLI run very well, Battlefield 4 gets about 200fps on average with all settings on Ultra, Black Ops III: 130fps+, Overwatch: 140fps+ and even GTA V with all setting 100% maxed gets around 95 - 110fps. The only game I really wish ran at a better framerate was Rainbow 6: Siege but that doesn't support SLI.

All in all I am very pleased with the new build and Setup. The custom cable combs are from MNPCtech, they are cnc machined from 1/8" thick 6061 aluminum so they are impossible to snap and look fantastic! The additional monitors are very useful and the Ergotech Stand is absolutely amazing! The build quality is outstanding. Although the base has a large footprint it definitely looks great and the hinges feel like they would support a car door.

As for now I will sit tight and wait for the GTX1080Ti release. Stay tuned for my next build!

Log in to rate comments or to post a comment.

Comments

  • 44 months ago
  • 3 points

This looks amazing. The fluid looks like acid running through pipes. Awesome. Super choice!

  • 44 months ago
  • 2 points

Are those UV lights in the case keeping that liquid bright green?

  • 44 months ago
  • 2 points

Yessir

  • 44 months ago
  • 2 points

1+ for this awesome build

  • 44 months ago
  • 2 points

nice water cooling did a really good job on tube routing.

  • 44 months ago
  • 1 point

Thanks :)

  • 44 months ago
  • 2 points

this case has amazing bends, well done!

  • 44 months ago
  • 1 point

love this build only thing i dont like is the sticker on the case but never the less this is great +1

  • 44 months ago
  • 0 points

:O That's BadBadRobot Man! Check him out on twitch, hes hilarious! https://www.twitch.tv/thebadbadrobot

  • 44 months ago
  • 1 point

Oh man, I have to look into those cable combs for when I buy my window replacement for my case; nice build and thanks for the comb tip.

  • 44 months ago
  • 1 point

How did you do that with the monitors? OwO

  • 44 months ago
  • 2 points

I'm a magician O.O

  • 44 months ago
  • 1 point

Cool build, cool look, just pretty cool overall.

  • 44 months ago
  • 1 point

That Fluid looks Amazing !

  • 44 months ago
  • 1 point

This is just glorious, how did you get the glow to be so consistent all the way around the loop?

  • 44 months ago
  • 1 point

I have UV tubing and UV fluid and lots of black lights :D

  • 44 months ago
  • 1 point

Ahhh, that explains so very much. And as much as I love looking at that I can't even imagine the pain your soul must feel when you have to fill it.

  • 44 months ago
  • 1 point

What exact fluid colors and UV lights did you use? I must know, this is a masterpiece that must be recreated!

  • 44 months ago
  • 1 point

Everything is in the Parts list, Fluid is XSPC EC6 Non Conductive Coolant - UV Green. Lights are CableMod WideBeam Magnetic LED Strip UV - 60cm / 30 LEDs

  • 44 months ago
  • 1 point

Is your sli working on 8x8 mode or 8x4 mode because of 950pro that requires 4 pci-e lanes?

  • 44 months ago
  • 1 point

Both cards are running 8 lanes, the M.2 runs off the PCH

  • 43 months ago
  • 1 point

Thanks, sir!

  • 43 months ago
  • 1 point

Great job on those bends!

  • 43 months ago
  • 1 point

Thanks :D

  • 40 months ago
  • 1 point

What did you use the double nipple and l connector for PLZ RESPONDDDDD AMAZING BUILD

  • 39 months ago
  • 1 point

Sorry its been a few days, Do you mean the link between the 2 GPU's?

  • 39 months ago
  • 1 point

i see what u did now, was the tubing hard to bend im thinking of doing a right angle build also

  • 39 months ago
  • 1 point

Ummmm, it's not as easy as it might seem. Order like 3 to 4 times as much as you think you'll need. You'll have a lot of time in it, watch some youtube videos and take your time.

  • 39 months ago
  • 1 point

Thanks for the response how many did you end up using lol

  • 39 months ago
  • 1 point

Sorry for the delayed response, I probably used 12 tubes, 3' long each.

  • 39 months ago
  • 1 point

Dual 980 Ti's for 2 1080p 60hz monitors? That's a bit overkill if I know overkill.

  • 39 months ago
  • 1 point

Jk didn't see the 1440p monitor lel I'm dumb.

  • 44 months ago
  • 0 points

get rid of the glass desk and fix those cables my guy

  • 44 months ago
  • 1 point

Naw man glass desk FTW! I did just order a bunch of cable management things though.

  • 44 months ago
  • -1 points

Stunning af! But i'd rather choose the pipe from CPU to the back, so we cant see it hanging there from front

[comment deleted]
[comment deleted by staff]