Description

Ryzen 1700 @ 3.75 Ghz 1.32v

AMD Wraith Spire RGB Cooler

MSI B350M Bazooka

Corsair Vengeance LED 2x8GB @ 2933MHz

EVGA 1080 Ti SC2

3x Thermaltake Riing 12 fans

EVGA G3 650W PSU

WD Blue 1 TB + 960 Evo.

Logitech G502 + Redragon K556 KB w/ Outemu Browns (with a few blues in the mix)

Comments

  • 28 months ago
  • 3 points

+1 especially for rotating the fan on the cpu cooler.

  • 28 months ago
  • 3 points

Holy **** this, irked me when I saw other builds without the fan orientated correctly

  • 28 months ago
  • 2 points

cool mousepad :)

  • 28 months ago
  • 1 point

Thanks man! I really like it too

  • 28 months ago
  • 2 points

When you see a build with a 1080 ti that is 1k less than one with a strix 1080

  • 28 months ago
  • 2 points

amazing

  • 27 months ago
  • 1 point

Beautiful build. Very nicely done. That's a lot of volts for a 3.75 o/c. You having any issues with temps on that stock cooler? What are they idle & at load?

  • 27 months ago
  • 1 point

Thanks man! I actually had to tone it down a bit because temps were high. While every day usage does work at 3.75 @ 1.3250 the temps were reaching 90+ during stress/torture tests. So I wasn't too happy with that, I lowered it to about 3.7 @ 1.275v which did work fine for everyday tasks, it wasn't stable enough for stress tests so I'm now running 3.7 @ 1.3v stable. Stemps are still unacceptable as they get quite high (90C+) - even with all the fans inside my case (but high ambient temps of around ~35C) so I'm swapping it out for a Cryorig H7

  • 27 months ago
  • 1 point

Thanks for the info. I like that H7 - be sure to post some more pics! I was thinking of swapping out my Noctua for the stock cooler. I'm at 3.75 too and usually idle around 37c and hit 75c under load. I think one of the issues is all the hot air my R9 Fury spits out into the case, so to maybe the Noc would drop it a 5-6c degrees more with a different GPU. 90c would be too hot for me, so I'm glad I asked before jumping all in and wasting a bunch of time.

  • 26 months ago
  • 1 point

Nice build dude! +1

I'm thinking of getting the same cpu, mobo, and case as you and I was wondering how did you connect the ryzen rgb cable and the case led strips to the mobo header if there is only one rgb header? Did you use a splitter or something? And if you used a splitter were you able to independently control the wraith rgb and the case rgb strips?

thanks a bunch!!

  • 26 months ago
  • 1 point

Sorry for the late reply, I plugged in the RGB strips directly to the PSU and the CPU cooler to the header. I am still able to independently control both of them as my RGB strips came with a separate control and the CPU cooler with MSI's Gaming app

  • 16 months ago
  • 1 point

Amazing build! I do wonder how you managed to change the GPU’s LED colours though. Is there a software for it¿

  • 15 months ago
  • 1 point

Yes, EVGA Precision X

  • 28 months ago
  • 0 points

Link to desk?

  • 28 months ago
  • 0 points

Just look on IKEA.