Description

Following on from my first build

https://uk.pcpartpicker.com/b/DkMZxr

When i started the picking parts i choose the case first. I wast going full water cooling at this stage, just an AIO setup. By the time i completed the build i had went full custom loop and out grew the case slightly. I Felt the 120 rear and 240 front was asking a lot.

After seeing the Lian Li PC-O11 i knew i needed this case. I could now fit 2x 360mm radiators which has doubled my cooling surface area

I can overclock to 3800x to 4425mhz @ 1.325v 5700xt to 2155mhz @1.250v which gets very hot peek 100C edge temp Ram to 3600mhz @1.45v, but its seems to heat the water up a lot (40C) for the little gains i get. 9954 on Time spy

So i run it 3800x @ 4.4 1.325v - 5700XT @ 2070mhz stock v 925mhz memory and 20% power with out the power play mod Left the RAM stock @ 3466, but water stays 35C after long game play. 9547 ish on Time spy

Edit:- Ive changed to OC settings down abit 3800x 4.4Ghz @1.3v Temps avg 55-60C Heavy Load 70C 5700XT Gobal Wattman OC 2090mhz avg 60-65c max 78c edge temps

Time spy score 9390

Log in to rate comments or to post a comment.

Comments

  • 8 months ago
  • 2 points

I think if someone said "I'm going to route my hard tubes this way" I would have tried to talk them out of it. But it works. I -surprisingly- like the way the light plays tricks with having them that close to the fans.

  • 8 months ago
  • 2 points

Thanks :D I believe water tube's should be the main focus of a water cooled build, it's what can make or break a build.

  • 8 months ago
  • 2 points

Well this is a feature level build. I love the solid bends you were able to achieve from just one tube. Great work man. How long did it take to build, tube bending included?

  • 8 months ago
  • 2 points

Thanks :D It didn't take to long, 2 weeks max. Most of the time was waiting on PETG tubes. I had loads of tube's left over from the original build so once i got the case i moved everything across and stared eyeing up some tube run's. Tube bending for this was easy enough. If you keep it simple or the bends as far away from each other as possible, i find its easier. Some of the bend aren't as perfect as id like them to be, but id rather have it that way than use 90 degree fittings everywhere. I really struggle to measure between bends

  • 8 months ago
  • 2 points

Added a few in build pictures

  • 8 months ago
  • 2 points

I love the custom loop, how does the 5700 Xt perform under water? +1

  • 8 months ago
  • 2 points

Seem really good. Can deal with everything i've through at it.

On Completely stock settings its max edge temp has been 66c peak boost 2050mhz Thats in time spy which seems to work it that bit hard as nothing else hits the high temp as it.

Thank you :D

I've played alot with overclocking it with the power play mod i can get 2160mhz @ 1225mv 925 mem OC but that runs very hot 95-100c edge temp which im not happy with

I've removed all that, done a global wattman Auto OC which is 2090mhz and max 70c edge temp which much better i think.

So summary i can run it 2160mhz but its hot for the little gains i see. Im much happy running it 70mhz less and colder. Runs everything at ultra 1440p no probs

  • 8 months ago
  • 1 point

Beautiful build!

  • 5 months ago
  • 1 point

What CPU block did you use?

  • 4 months ago
  • 1 point

Which pump and reservoir is that? Awesome build!