Description

Detailed SPC. has been shown on the part list. It will be cheaper than the time we purchased. The whole chassis has taken two months to build it. Still not the perfect one, got wrong water distribution board, it was supposed to build it without any tube bending, but out of time and patience, so I treated this water distribution board as water reservoir combo. Not longer enough CPU sleeve cable, pretty sad. There are 11 5V-rgb strip + 4 12v-rgb strip in the whole chassis, all strips are sync with ASUS ARUA. 1. TT Riing Plus H126 + inwin steel frame RGB fan*4 2. Both radiators (360+240) came from a Chinese manufacturer that is called HanJiang. 3. Not enough budget on the water cooling components, so did not use whole EK sets, the detailed cooling parts are listed as below: a) BA fitting (gold)+water distribution board (it is noticed that this board may not capable with Z390 series MB) b) BA CPU block c) EK GPU block+DDC pump d) HJ radiators+ flowmeter Thank you for watching this, let me know if you have any questions.

Comments

  • 6 months ago
  • 17 points

Me before endgame: Man that is a really cool iron man PC build! Me after watching endgame (and crying): This build........

I love it 3000

  • 6 months ago
  • 3 points

SPOILER ALERT

[comment deleted by staff]
  • 6 months ago
  • 11 points

That is an obvious feature. I smelled it a mile away.

  • 6 months ago
  • 4 points

Much appreciated.

  • 6 months ago
  • 2 points

I f**king called it.

  • 6 months ago
  • 5 points

Saw this on Reddit. Feature coming!

  • 6 months ago
  • 2 points

You bet!!

  • 6 months ago
  • 3 points

I THINK THIS MAY BE MY FAVORITE BUILD ON PC PARTPICKER.

  • 6 months ago
  • 2 points

This is the most attractive build i have ever seen on this site

  • 6 months ago
  • 2 points

Much appreciated.

  • 6 months ago
  • 2 points

Best. Build. Ever. Forever.

  • 6 months ago
  • 2 points

Much appreciated.

  • 6 months ago
  • 2 points

builder-wu did your last inwin d frame gold build get featured??

  • 6 months ago
  • 1 point

Yes, sir. I did.

  • 6 months ago
  • 1 point

Do you mean it got featured, or are you asserting the fact that you built it?

  • 6 months ago
  • 2 points

RIP iron man Intense sniffing I smell coke...... and a feature

  • 6 months ago
  • 1 point

Thank you for watching it .

  • 6 months ago
  • 2 points

Holy... it's beautiful. This better be featured.

  • 6 months ago
  • 3 points

Thank you for watching it .

  • 6 months ago
  • 2 points

Is that a feature I smell?

  • 6 months ago
  • 1 point

I love this build 3000!

  • 6 months ago
  • 2 points

Pepper loves you too.

  • 6 months ago
  • 1 point

very confusing

  • 6 months ago
  • 1 point

UUUUUHHHHHHHHHHHHHHHHHH, YES.

  • 6 months ago
  • 1 point

this is amazzzzing

  • 6 months ago
  • 1 point

Is that a custom cpu cooler??? It looks fire! Also if you are into iron man check this out: https://www.thingiverse.com/thing:1779274 This dude made a 3d printed iron man suit, and you can download all the files right there, if you want to make it as well... I am currently making my own, it takes some patience, but if you have it (and the wiring knowledge) it is really worth it. :) +1

  • 6 months ago
  • 1 point

Yes, you are right, Moose, it is BA cpu block.
Here is the website that I ordered from it. https://www.ebay.com/i/302712503854?chn=ps

  • 5 months ago
  • 1 point

Oh, that's a great deal, Enjoy!

  • 6 months ago
  • 1 point

either way looks sick

  • 6 months ago
  • 1 point

+3000

I love you 3000

  • 6 months ago
  • 1 point

+3000

  • 6 months ago
  • 1 point

Coolest build I've ever seen before. Great job!!!!!!!

  • 6 months ago
  • 1 point

Thank you very much!

  • 6 months ago
  • 1 point

This is Amazing, and inspiring, The yellow light looks really cool, but the blue is just crazy. I really like iron man, he's my favorite marvel character, and the first iron man movie is the only movie, I've saw in the theater twice. Thank You for posting.

  • 6 months ago
  • 1 point

Thank you for watching it, much appreciated.

  • 6 months ago
  • 1 point

Better than an American cheeseburger I'd wager.

  • 6 months ago
  • 1 point

Everyone can build such a PC, not that hard, it just needs more time and patience.

  • 5 months ago
  • 1 point

/woosh

  • 6 months ago
  • 1 point

Hands down has to be the coolest build i have ever seen. Obviously that is subjective, but still, this build is amazing and I am extremely jealous and wish i had this much money to spend on a computer. This is a great tribute. RIP Iron Man :.(

  • 6 months ago
  • 1 point

You bet!

  • 6 months ago
  • 1 point

PC looks absolutely stunning!

  • 6 months ago
  • 1 point

Love you +3000

  • 6 months ago
  • 1 point

I was gonna write "I love this 3000" But someone beat me to it. Great build. I hope it doesn't overheat... lol get it?

  • 6 months ago
  • 1 point

360+240 rads. with sandwiched fans, CPU 48C+GPU 42C after 24-hour stress testing.

  • 6 months ago
  • 1 point

Wildest PC build ever!! Congrats!

It makes me wanna do air guitar while listening to Black Sabbath's "Iron Man" song. LOL.

  • 6 months ago
  • 1 point

Much appreciated.

  • 6 months ago
  • 1 point

Thank you for actually adding all the parts you used!

  • 6 months ago
  • 1 point

You are welcome, let me know if you want more detailed info, I'd like to share the way to build this PC. I gonna have a captain America coming this coming Fall, I am still doing some hand skectch works on it.

  • 6 months ago
  • 1 point

What bending stuff do you use?

  • 5 months ago
  • 1 point

Hey, Cob, I used a XSPC bending tool, I also used a three-way level and caliper to make it precise.

The bending tool can be found as below: https://www.amazon.com/XSPC-PETG-Easy-Bending-Tool/dp/B016B29ST4

  • 6 months ago
  • 1 point

What bending stuff do you use?

especially from your last build. those bends were insane!

  • 5 months ago
  • 1 point
  • 6 months ago
  • 1 point

One of my favorite builds on this side hands down. I guess you could say... I love it 3000.

  • 6 months ago
  • 1 point

+3000

  • 6 months ago
  • 1 point

I love it 3000

  • 6 months ago
  • 1 point

Totally awesome build. It literally has character in it. Keep it up.

  • 6 months ago
  • 1 point

Much appreciated.

  • 6 months ago
  • 1 point

+1 Very cool build!

Do you have details on those Iron Man figures? They're really neat.

  • 6 months ago
  • 1 point

Unfortunately, I only have the blueprints about these pictures, too me a month to do the design works.

  • 6 months ago
  • 1 point

This is an amazing build. Iron Man is one of my favorite heroes, so these is seriously next level. :)

Thank you for sharing this beauty. We love it 3000.

  • 6 months ago
  • 1 point

You bet.

  • 6 months ago
  • 1 point

Amazing work! Looks outstanding!

  • 6 months ago
  • 1 point

Much appreciated.

  • 6 months ago
  • 1 point

good job on feature man :)

  • 6 months ago
  • 2 points

Thank you very much !

  • 5 months ago
  • 1 point

:)

  • 6 months ago
  • 1 point

Excellent case choice for the theme. Fittings and bends are spot on. Well done on the feature +1

  • 6 months ago
  • 1 point

Thank you very much!

  • 6 months ago
  • 1 point

Good thing i'm having a burger tonight cause seeing this made me sad. :(

BTW great looking build. Congrats on the feature.

  • 6 months ago
  • 2 points

Love u +3000

  • 6 months ago
  • 1 point

Now THIS is a next-gen build. +1

  • 6 months ago
  • 1 point

Again, everyone can do this work, nothing special, I like building PC.

  • 6 months ago
  • 1 point

Total Tribute case. Nicely done.

  • 6 months ago
  • 1 point

is the helix thing a flow indicator?

  • 6 months ago
  • 2 points

Yes, it is a flowmeter or flow indicator.

  • 6 months ago
  • 1 point

Why isn't there a favourite button?

  • 6 months ago
  • 1 point

That's such an impressive setup! I'd love to see the full thing! I'd love to see how it looks next to a monitor and keyboard!

  • 6 months ago
  • 1 point

I am speechless, I would upvote this 10 times if possible ♥

  • 6 months ago
  • 1 point

This does put a smile on my face.

  • 5 months ago
  • 1 point

The Trident Z Royal actually works with this aesthetic....

  • 5 months ago
  • 1 point

Where the hell did you get that CPU waterblock? Thing is dope. Looks custom?

  • 5 months ago
  • 1 point

Well done. +1

  • 5 months ago
  • 1 point

WOW!!! Huge iron man fan I love this soooooo much! I am designing a build and have planned on using the same case where did you get the iron man side panel for the cougar conquer?? I really hope you didn't custom make it unless you are willing to sell one for me? Again great job!!

  • 5 months ago
  • 1 point

Hello, those RGB panel pictures were provided by the owner, I re-designed and printed it out. I won't sell them due to the owner's copyright. I can make something different RGB panels for you if you have the pictures. Or, I could design some special panels for you.

  • 5 months ago
  • 1 point

your picture of the ram locked together triggered me - expensive stuff to do that with.

  • 5 months ago
  • 1 point

this makes my eyes hurt

  • 4 months ago
  • 1 point

Love the build man. Just ordering my parts to do something similar. Do you like the distribution block? I am very on the fence about it right now especially with the pump it comes with.

  • 4 months ago
  • 1 point

Hello, Specncer, please be aware of that, the water distribution channel board is used for simplified your loop system, it does not contain plenty coolant for some special cases, like if you only one radiator, then you should consider whether you have enough coolant to flush the whole system, otherwise, your system is been cooked. Hopefully, I am answering your question.

  • 4 months ago
  • 1 point

Thank you. No I’m aware it’s just an aesthetic part for looks. I have 2 radiators. I just want it to keep the hard lines running in straight lines. But I was worried about the quality of the distribution plate. Have you had any leaks from it?

  • 4 months ago
  • 1 point

Most or these channel boards are made of the same materials, very good QC control, so don't worry about it.

  • 4 months ago
  • 1 point

that is an amazing build! thank you for the inspo, it gave me an idea for my own build :)

  • 4 months ago
  • 1 point

thank you for watching it. Good luck to your build .

  • 3 months ago
  • 1 point

Quick question about the barrow cpu water block. Is it copper based or aluminum. I am new to water cooling and I was interested on that cpu block for a while now.

  • 2 months ago
  • 1 point

oh man, imagine breaking apart a $1300 GPU, voiding the warranty, just to put custom thermal paste on it. You got bigger ones that me, sir. I hope that few degrees is worth it!

Anyone know how many degrees you shave off by repasting a GPU?

  • 1 month ago
  • 1 point

Very Nice, Wow

  • 1 month ago
  • 1 point

Wow, amazing! How did you paint the case?

  • 24 days ago
  • 1 point

now this... brings a smile on my face

[comment deleted]
  • 6 months ago
  • 1 point

Much appreciated.

[comment deleted by staff]
[comment deleted by staff]