• Log In
  • Register


QHD Gamecube

by Skuby


Part List View full price breakdown


Date Published

Dec. 17, 2016

Date Built

April 15, 2018

CPU Clock Rate

5 GHz

CPU Temperature While Idle

30.0° C

CPU Temperature Under Load

78.0° C

GPU Core Clock Rate

2.1 GHz

GPU Effective Memory Clock Rate

6.003 GHz

GPU Temperature While Idle

32.0° C

GPU Temperature Under Load

54.0° C


(Pictures out of date, will update eventually)

Updated hardware list for my SFF-ish 1440p gaming machine.

Part Reviews


The kit does exactly as advertised, running the XMP at DDR-3200 with the advertised timings. I was able to take it up to DDR-3466 with the same XMP timings and voltage, which was a nice bonus. Definitely a solid kit!


Hits its rating of 1570 MB/s on sequential reads and 540 MB/s on sequential writes in benchmarks. Also has a 5-year warranty. I'm currently using this as a boot drive and it's been blazingly fast on startup. This seems to be a great M.2 drive for the price-point.


Got it for a great price during Black Friday 2016. It's been a solid performer for the month I've had it as my storage drive.


A very nice case with a simple exterior design and a highly customizable interior layout. Despite the size, there are a lot of options for cooling and cable management. All fan mounts, except the back panel, have mesh filters to help keep dust and debris to a minimum. The top panel window is also a nice touch, especially if you add some lighting. I would definitely recommend this case if you're looking for something smaller than a mid- or full-size tower but still want to pack a similar level of power inside.


This monitor has so many features that appeal to a gamer: 144/165Hz, 1440p, G-sync and IPS for the image quality junkies out there. Once calibrated, it has great color accuracy and image quality. The backlight bleeding I've heard about is non-existent on the unit I received. The stand could be a bit more sturdy, but if you have a solid desk that won't be a problem. An overall outstanding monitor.


The sound profile favors the mids a bit, but provides a nice full sound for their size. A great little set of speakers, especially if you're limited on desk space.

Comments Sorted by:

zionyarla 4 points 27 months ago

Man the frame of leds seen from the front panel looks incredible! I like the whole setup you have with the desk as well, thumbs up.

Skuby submitter 2 Builds 2 points 27 months ago

Thanks! I can't take all the credit on the lighting since I saw another build on this site using the Hue+, but I did set up a static lighting theme for it to match my keyboard. The front panel LEDs definitely give the case a nice aesthetic that most others don't have.

LastRaven17 1 point 22 months ago

I used mine to have bottom lighting, totally worth the hassle for the extra effect

Wolverayne 1 Build 3 points 27 months ago

That looks so clean! :O Nice job man! P.S. Your cats face doe haha

seb4s7ian 2 points 27 months ago

I love the build, but the Apple Keyboard :( Jk +1

Skuby submitter 2 Builds 1 point 27 months ago

Thanks! I've rectified the Apple Keyboard "situation" since Best Buy had a deal on the Corsair STRAFE RGB Mx Silent this weekend. I'll still be using it for work, but now I'll have a flashy toy for when I'm at play :)

Kriegripper 1 Build 1 point 27 months ago

Nice. How is the hybrid holding up

Skuby submitter 2 Builds 2 points 27 months ago

I'm really digging it. At first I thought I made a mistake getting the hybrid, but once I pulled out the 5.25 drive bay cage and swapped the intake fan for the hybrid radiator everything fell into place.

It's been running solid @2113MHz GPU & 11016MHz on the memory using the slave bios on the card. I'm quite pleased since the default is 1721MHz GPU (1860 boost) & 10010MHz memory, and that translates to a nice performance boost for an already powerful card. I have the fan set to automatic, but it never goes over the baseline of about 1200RPM and never breaks 50C. I'm actually going to try and push it a bit further this weekend, hoping that the new motherboard gives me a bit more stability. Wish me luck!

aceCaptainSlow 2 points 27 months ago

If you want it to run a little cooler, swap the fan out on the hybrid radiator and connect the new fan to the mobo. For some reason, you can't control the fan curve on the radiator fan. You might be able to get about 3 or 4 degrees cooler.

Skuby submitter 2 Builds 2 points 27 months ago

I might just do that as I'm considering swapping the 120mm fans (3 in total right now) with a set of RGB fans in the near future. Thanks for the tip!

aceCaptainSlow 1 point 27 months ago

No problem m8, just make sure you have enough fan headers on your mobo first.

Kriegripper 1 Build 1 point 27 months ago

Nice, update me on how it goes.

Skuby submitter 2 Builds 1 point 27 months ago

I've been testing for a few hours and I think I've just about hit the stable limit on this card.

I could take the GPU up to 2138MHz, but I had to reduce the memory clock significantly which produced much worse results in the Heaven benchmark. It's very stable and produced the fastest benchmarks at 2113MHz/5514MHz (11028MHz since it's DDR), so that's what I'm going to run with.

Kriegripper 1 Build 1 point 27 months ago

Sweet, sweet. Enjoy it man

I_Need_Big_Drink 2 Builds 1 point 27 months ago

Just finished my build with the hybrid. It kicks ***. Running at 2139 right now, hopefully I can squeeze out some more later. At full usage it stays at 45 and below. So glad I got it, wishing you luck!

squats 1 point 27 months ago

Damn passed the 2100 stable? Thats really nice you got lucky!:D how are the general case temps? Like mobo

I_Need_Big_Drink 2 Builds 1 point 27 months ago

Haven't checked mobo temps, but in the case (Enthoo Evolv ATX TG) it's just warm, most of the heat coming from the GPU, but of course the case could be cooler but I set the CPU and GPU fan curves for quiet operation in the lower loads. CPU idles in low 20s, haven't recorded temps while gaming because I'm not concerned for it, but I will next time I play. Coming from a 2014 mini ITX cube I am astonished by the temperatures at such low noise.

Skuby submitter 2 Builds 1 point 27 months ago

What's your memory clock at? I'm finding the that if I take the GPU clock up I need to reduce memory clock, and vise versa. Still trying to find the best balance with this card.

I_Need_Big_Drink 2 Builds 2 points 27 months ago

I added a +500 something in EVGA PrecisionXOC, forgot the exact number. I also tried 2152 in Unigen Heaven but it kept going back down to 2139 by the end of the benchmark. I'll try putting the left slider for power/voltage to 100% instead of 90%, maybe It'll make a difference.

F1r3tT3amS1x 1 point 27 months ago

Dang good job!

spadeskull 4 Builds 1 point 27 months ago

This build is awesome !

Tcc13c 1 Build 1 point 27 months ago

Would the 5.25in drive bay fit if you put it back in the case?

Skuby submitter 2 Builds 1 point 27 months ago

The GTX 1080 and H100i v2 extend the full length of the case and protrude too far inward to allow the cage to be mounted. That might be a deal-breaker for some on the 250D, however I have no use for an optical drive in this build. There should be enough clearance left for something like a shallow fan controller, though you may have to get creative to secure it in place.

mfer 1 Build 1 point 27 months ago

nice build, :)))). where did you get that table from, it toooooo sick:)))))))

Skuby submitter 2 Builds 1 point 27 months ago

I got the desk back in July at Office Depot. It's $150 right now, but tends to go on sale sometimes for $100. Here's the link: Realspace Limble Glass Computer Desk

apang1 1 Build 1 point 27 months ago

Hi, I love the build, and I too am building with a Corsair 250D, and H100i v2, with all the usual installation problems, and I am putting a DVD drive as well. My question is, how did you install the M2 drive? I am having huge problems getting this detected in the bios, and windows install. It just won't appear no matter what options I put in the Bios. Funnily enough I can see the drive in device manager when I boot off another drive, however in disk management I can't see it either. Wondering how you got the drive to be your boot drive. Thanks

Skuby submitter 2 Builds 1 point 27 months ago

I installed the M.2 drive on the back of the motherboard and it was instantly recognized in the bios, but I don't think it showed as a boot device. When I installed Windows I made sure no other drives were connected and did the install from a flash drive. Once the Windows install was complete I reconnected my data drive and went back into the bios and set the M.2 drive as the boot device and it's been running fine since. Are you using the same motherboard? Also, are you running the latest firmware on your board?

apang1 1 Build 1 point 27 months ago

Yes I have the latest firmware. My problem is when I install from a flash drive, windows can't see the drive to install windows to. Very frustrating. So much that I've given up! ha. I've built my PC now using a normal SSD and it's all good but I've wasted the M2 drive. Really wanted this to work.

I_Need_Big_Drink 2 Builds 1 point 26 months ago

Found myself looking at this build again, love those visual improvements!

Skuby submitter 2 Builds 1 point 26 months ago

Thanks! I too am loving the visual improvements. I find myself often times sitting back at the desk and just admiring the lighting :)

AlexvForm 1 point 26 months ago

Hey man, I love this build. I hope to build something like this in 2017, but I have a question: Does this top panel close easily, or do the psu cables and GPU wc tubes get in the way?

Nice setup, thanks for sharing

Skuby submitter 2 Builds 1 point 26 months ago

Thanks! The hoses for the CPU and GPU coolers barely push against the top panel. Enough to add a little resistance when working with the panel, but not enough to cause any issues.

Good luck with your build, I hope you enjoy it as much as I'm enjoying mine!

Kelsus 1 point 26 months ago

How many lighting strips did you need for the He+ to get that look?

Skuby submitter 2 Builds 1 point 26 months ago

The Hue+ comes with four 10-LED strips, and that was the perfect amount for this build. The two on the inside extend just past the window, and the two on the front panel can pretty much make a complete circle, as seen in the last few pics.

Greencharger 1 point 26 months ago

I've been looking at this case for a future build but after looking at all the pictures, how did you set up the 8 pin eps cable? The tubing from the cpu cooler looks like it get in the way.

Skuby submitter 2 Builds 1 point 26 months ago

Between the layout of that connector on the ASRock motherboard and the PSU having flat cabling, that gives just enough clearance for the CPU cooler tubes to get by. I'll add a picture of the layout tomorrow if you'd like.

Greencharger 1 point 26 months ago

Sure, that would be great.

Skuby submitter 2 Builds 1 point 26 months ago

Pics added to the end of the gallery.

dann20201 1 Build 1 point 16 months ago

On the front panel for the LED's, what are those small hooks for ziptie that you used called?

Skuby submitter 2 Builds 1 point 16 months ago

Zip tie mounts, mounting bases or something similar. I got a 10 pack at Home Depot for a few bucks. Here's a link on Amazon for a 50-pack, but you might be able to find a smaller pack once you know what to look for: https://www.amazon.com/Adhesive-Backed-Mounting-Bases-Pieces/dp/B0071N1YGS/. I believe mine are 1" x 1", but you can probably get away with smaller mounts.

dann20201 1 Build 1 point 16 months ago

Thanks! :) Great job on the build!

JustAnAxolotl 1 point 8 months ago

This is a really cool build, how does the dolphin bar perform?

ZombieBitesKill 1 point 3 months ago

Great creative build! +1

[comment deleted]