PCPartPicker

  • Log In
  • Register

Comments

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 9 months ago

Thank you so much!!.. i like to keep it clean.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 14 months ago

are you in the U.S.?.. when i got mine it was 159.00... now it seems to be up to 199.00.. but i just dont see where you are gettin that 330.00 from.. any way, its a great cooler... but they all do the job.. but I wouldn't pay 330.00 for it when you can get any other 280mm setup for about 150.00 or less.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 15 months ago

hey.. yeah.. i was in the Tubbs fire... it was brutal.. but saved the house!!.. lotta luck and whole helluva lot of hard work.. where are you seeing this $330 for the Kraken? i think i got my x62 for like $159.00 like you said...

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 16 months ago

hey thanks... sorry for the late reply... been surrounded by flames with no power for the past 2 weeks... what do you mean $330 for the kraken?... or am i confused?.. i am probably confused.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 17 months ago

hey man, sorry for the late reply... the card can be loud if the fans are maxed out, but they wont really get maxed out because icx design seems to dissipate the heat extremely well... I personally set a custom fan profile that stays ahead of the heat and is for the most part silent... even on long gpu renders, the card never hits 60C and stays fairly quiet.. however, if you simply max out the fans, it will like any other card, be loud... but the newly designed radiator is more efficient and seems to require less fan speed to achieve excellent temps, so therefore it can run very quiet and cool...

Skraydd's Completed Build: Elyz'

DflippinK 2 Builds 1 point 18 months ago

diggit.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 18 months ago

tried 7A33v34, was problematic... but the later released beta v3.51 is flawless and fast... so i am currently using beta v3.51 and highly recommend it...

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 18 months ago

haha... i made it.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 19 months ago

hey. thanks for the tip... Boot times have been greatly reduced via the latest beta BIOS.... works very well now.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 2 points 19 months ago

Thanks bud.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 19 months ago

should be a pretty sweet build man... and yeah... i just got that ssd to get started with the build and pick more drives later.... I threw a segate barracudo pro 6tb in there and probably gonna throw a 960 pro in the m2 slot and use this one or another 850 evo as a scratch disk.. but honestly... i dont even need to.... im only doing it cause i feel like i should... Also, check your ram options... the new microcode has made many ram kits compatible now.. so you can probably get some relatively less expensive kits that will work flawlessly at 3200+...

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 19 months ago

haha... i cant even remember why that happened... I think the case only came with one 140mm and a 120mm.. and i wanted a pair of 140s up top for exhaust.. so i had to order the other 140mm.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 20 months ago

no prob man...

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 20 months ago

itsall good either way... the air will move fast enough to not make much of a difference anyway.. the biggest consideration is how well it flows through the case... because this case can really move some air through it, i like to blast the rad with the coolest high speed air i can throw at it... then i tune the exhaust to either maintain slightly positive pressure under normal operating conditions, or to max excavation for extreme performance conditions... either way will likely only affect your temps a couple degrees if even that.. but i have found this to be the best yet... my temps are cool.. usually 30c -55c stock full load... and up to 72c@4.2 @ 1.44325v... and my gpu has seen 60c like 5 times since ive owned it... thing just stays cool.... one other thing to note though is your dust filters.. they will highly restrict your airflow... they are totally fine for normal use and even some performance benching, but if you are really gonna push your system, id say pull them off while doing so... it takes quite alot to saturate a good 280mm rad, but id say dont even give it a chance.. move the air.

jgperson's Completed Build: All wet but still classy

DflippinK 2 Builds 2 points 20 months ago

Nice!... killer build man.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 20 months ago

Intake... i want the rad to have the coolest air going to it.. and that always comes from outside the case with no extra heat saturation... just my personal preference.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 2 points 20 months ago

no man.. wouldnt really change a thing.... you can check out the performance of this build at http://hwbot.org/user/dflippink/ .... it is an outstanding performer... the only thing i have left to do with it is try some optional RAM sticks... It is solid and fast at 2666.. but apparently things open up even more at 3200+... The mobo runs head to head with the performance of the CH6.. almost identical... but i have had zero problems with my board where CH6 seems to be troublesome for alot of people.. I cant really recommend this setup enough if you want to build a ryzen rig...

ryanbiscobarnes's Completed Build: Toronto Maple Leafs

DflippinK 2 Builds 1 point 20 months ago

nice setup!!

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 21 months ago

haha!.. a custom watercooling setup.. there isnt really a great amount of room in it for a custom water setup... i mean, it could be done.. and it would be RAD.. but it would be a helluva lotta work and mostly a pain in the butt.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 21 months ago

Thanks!!

Sketch25's Completed Build: EK Water Cooled Air 740 SLI 1080 Ti's

DflippinK 2 Builds 2 points 21 months ago

Freaking Beautiful, man!!!,... nice work.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 21 months ago

checkout the hardware canucks review.. he covers it pretty well.. and as for the cooling, it does its job extremely well...

https://www.youtube.com/watch?v=L-jMOTYWCgU

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 21 months ago

yep.. Logo, No Logo, the Ring, its all independent of eachother.. and there are different effects you can add to each.. and you can select whatever color you like for each as well.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 21 months ago

mine worked perfectly up to 2666... but I haven't clocked it past that yet.. it hasn't given me any problems.. but I haven't reached 3000Mhz as of yet... I also haven't really tried though.. it all seems to depend on which Mobo you choose and what the latest updates for that particular board are... and supposedly, all boards are receiving major updates this month specifically for RAM compatability..

ron.hiscock's Completed Build: Ryzen Workstation:

DflippinK 2 Builds 1 point 21 months ago

Nice setup!!

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 21 months ago

haha!! thanks...

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 21 months ago

hey thanks!!..

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 21 months ago

Absolutely!!.. the only only thing I wouldn't recommend it for would be a custom loop..

Cinnamon92's Completed Build: Medium Rawr

DflippinK 2 Builds 2 points 22 months ago

Thats a pretty rad medium... Nice work!!.. and your desk looks rad too!!

lil.noot's Completed Build: Violet Dreams

DflippinK 2 Builds 2 points 22 months ago

I already said I liked it.... but I'm back... and I like it even more!! good job!!

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 22 months ago

*edit... boosting all cores.. not two cores

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 22 months ago

update... just ran at 4.2 all cores for the past hour.. no probs.. ill give it a stress test tomorrow and repot back.

enragedshoe's Completed Build: Q*bert

DflippinK 2 Builds 3 points 22 months ago

Rad!!... Love-ly!!

lil.noot's Completed Build: Violet Dreams

DflippinK 2 Builds 2 points 22 months ago

YES!!! nicely done..

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 22 months ago

yeah.. i get it.. but, yours look so clean it pretty much makes them a necessity!!...

marcschober's Completed Build: Minimalistic Setup.

DflippinK 2 Builds 2 points 22 months ago

dig it!!

Rican7's Completed Build: 2017 AMD Zen Summit Ridge Build

DflippinK 2 Builds 2 points 22 months ago

nice!!..

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 22 months ago

Thanks!... I went with the 1800x mostly because it definitely works as it had been suggested to work.. and for me, that meant running at a base speed of 3.6ghz, boosting two cores as needed, the ability to clock all cores to 4.1, and staying cool while doing it no questions asked.. While the 1700 was reaching close to the same speeds, sometimes better, most reviews had shown varying results, some with temps getting out of hand around 3.9... and while there were lots of suggestions and rumors of Silicone Lottery and Binned Chip variables, ..most of the test's on the 1800x were providing consistent results comfortably running at 4.1... What this all ads up to for me in the end, is sitting down to my machine, ripping through whatever i throw at it stock, and not even breaking a sweat when i run it at 4.1... The 1700 is by far the best purchase you can make this year so far, and an absolute beast itself,... but for this build, and its intended purpose, the 1800x, (XFR, base clocks, boost clocks, and overclocks), was the solid choice, and worth every penny..

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 22 months ago

Thanks Man.. wasn't really all that difficult... just measured everything 40 times before each cut and bend.. Lol.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 22 months ago

Thanks!!

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 2 points 22 months ago

Thanks man!!. yours is stunning!!.. makes me really want a nice set of sleeved cables for this one.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 22 months ago

haha.. predetermined... the next one will be Wiggly Bits!!!

Rican7's Completed Build: 2017 AMD Zen Summit Ridge Build

DflippinK 2 Builds 2 points 22 months ago

haha!! OCD pain!!!... yeah, i just built a Ryzen rig too but held off on the NVME cause i dont know enough about em yet.. heard a few people were havin problems... but glad to hear yours is runnin solid on the new chipset.. guess i might have to get one sooner than later..

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 2 points 22 months ago

Thank you very much friend!!!.. it is a great case... really good airflow capability too..

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 3 points 22 months ago

probably about the same point as having a windowed side panel.. however, you can also stack things on it such as ssd's, or support your gpu from it... even paint it pink if you like.

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 1 point 22 months ago

Thank you.

Rican7's Completed Build: 2017 AMD Zen Summit Ridge Build

DflippinK 2 Builds 2 points 22 months ago

Hell yeah!!!.. thats a nice build.. how do you like the M.2.. any issues?

DflippinK's Completed Build: SOLID!!! 1800x

DflippinK submitter 2 Builds 2 points 22 months ago

Thanks bud!... Dont remember if i told you or not, but i decided to make the cover while waiting for the then mythical x62 AM4 bracket... had the whole setup built, just staring at me, with nothin i could do for about two weeks.. so.. i did what i could to it.. haha.

Rican7's Completed Build: 2017 AMD Zen Summit Ridge Build

DflippinK 2 Builds 2 points 22 months ago

So nice man...

CalinStelistu's Completed Build: My upgraded build V5

DflippinK 2 Builds 1 point 22 months ago

Rad build!!.. Dont worry about your chip.. it'll go to 4.1 with bios updates..

Page
1