I assume you mean the fan on the GPU itself, and not the fan on the GPU’s radiator. If so, then no; through Precision XOC, I made my own custom fan curve for it.
GOD DANG THOSE CABLES
I’m sorry, I don’t think I understand.
Ah ok. I’m pretty sure the SP120 RGB uses a seperate cable to power/control the LEDs as well a 4pin to control the fan itself. If you get an adapter, buying another red ML120 should run fine. But if you want a 3pin fan to not worry about an adapter, the regular SP120 is a good choice.
I would not think so, although I am not sure. The LEDs may not be as bright as they usually are. What fans are you looking at?
I may not be understanding your question correct, but yes a 3pin fan will work the same as the original does (except for a performance increase over the stock fan) since the stock fan is also a 3pin. Using a 4pin fan will not allow you to set the fan speed at idle and will not allow you to set the fan speed at 100% in my experience. A 3pin fan should be able to go anywhere from 0% RPM to 100% RPM.
I mainly bought the ML120 to match the aesthetics of the rest of my build, not really for a performance increase. The stock fan that comes with the GPU rad is mediocre at best, from what I’ve read. I believe the lowest the ML120 on my GPU rad will spin is roughly 30% because, since it is essentially receiving power from a 3pin power cable and the fan has a 4pin power connector, the fan speeds cannot be controlled as freely. As I’ve said, the lowest I’ve seen the fan run is about 30% RPM, but also, the highest I’ve seen it run is about 70-80%. If you want the aesthetics of the ML120, go for it. Otherwise, getting a 3pin SP120 may seem like a more viable option.
The GPU has a 3pin fan connector that is by default hooked up to the standard radiator fan that comes with the GPU. I bought a cheap 3pin to 4pin adapter off Amazon and connected that to my GPU fan connector and my ML120 to the adapter. Even if you do this, however, the fan never stays idle, even if there is no load. The lowest it will get to is about 30% RPM.
(I managed to hide it pretty well but if you look closely you might be able to see the GPU fan cable running to my ML120 right next to/underneath the GPU watercooling tubes)
Thanks! As soon as my NZXT Internal USB hub arrives, I’ll be connecting my Hue+ and RGB strips. I’ll make sure to add more pictures once it’s all done!
Thank you! And yeah, keeping a monochromatic/neutral color scheme was a big factor when I was planning this build out!
Inspired from a variety of people, including all of the Techtubers. I would say most of my inspiration for this build came from DevvM’s PC build. And for the name, I had chosen this name long before, at least a year ago. So I was first! :)
Thanks! And yes, CABLE COMBS GALORE!!
looks over at pc
I don’t feel so good...
but anyways, holly balls that is clean
“$5000 ULTIMATE THREADRIPPER PC BUILD”
looks at total cost
You sir just lied.
Looks pretty neato
Oh, and cool build as well
O P E R A T I O N H E A L T H
...cool build +1
I wish I was your girlfriend... not in a weird way.
Please enter Setup Wars.
+1 for RGB
Ah ok, I understand.
Nice build but... where's the GPU?
I know I'm not op but imo Formula looks nicer.
Nice build! SO MUCH GREEEEEEEEENNNN!!! +1
Nice build and nice theme. Pretty similar to my upcoming build. Thanks for letting me have something to look forward too while I wait lol. +1
Thanks! Could you PM me the lengths of the cables that you got? I have the same case and I am also ordering from ensourced, but I don't know how long the cables should be for a mid tower ATX case.
Are those cables extensions or full sleeves cables? +1 for RGB
Nice build. +1 for cable management!
Very cool build, I read that you are using Cablemod cables. Are they of the ModFlex variant or the ModMesh variant?
Frost-byte? Idk, it's a common name for a white ish themmed pc, but it's all that comes to mind. Maybe more pics?
Cool build! P.S. I have the same furniture in your (what seems to be) bedroom! What a coincidence!
The dedication to cable management (even with a full custom loop!) deserves a feature. Lovely build, the color scheme is awesome!
I came for cat. Stopped for pc.
Bonjour! Sorry, that's the only French word I know (at least I think it's French). Nice build you got there!
There is like no way you have not seen TechSource's video. I mean, the title, the theme, and the build... cool build nevertheless.
Sorry, didn't mean to. :P
Have taken the title for the
Most Expensive Build on PCPP!!
Awesome build man, what a beast of a computer you got there!! +30174.00
Nice build! I've been thinking about deliding a 7700k as well. Would you recommend?
Glances at this build
Turns head over to my old mid 2012 MacBook
Awesome build man, I can never get over these Phanteks Enthoo Evolv builds. Especially if they are water cooled! +1 all the way.
Bah!! Who needs a GPU when you have a build this beautiful! Awesome build man, +1!!
The force is with this one...