Looks much better now. :-D
great white and black build :-D. Try adding some exhaust fans on the top and back and this should improve your gpu temps. its good that you went with an SF psu, so your gpu is able get some fresh air from the bottom of the case. For me i went with a normal size psu, so i had the same issue with air cooled gpus and i solved it by getting an evga hybrid gpu. now the pc is just dead silent.
a 3600 have the same performance of an 8700 and better in some benchmarks, also its way cheaper. Great choice
Great build. As you said its a shame Cryorig stopped producing this cooler, its my favorite and in my opinion, its the best looking air cooler out there, also it performs very well. Some custom sleeve cables for your build maybe white will take it to another level. just my opinion :-D
Great build.. i had bad luck using air cooled gpus in this case because they get hot and loud so I switched to a water cooled gpu to make my pc quiet.
Nice build, one suggestion is to replace your gpu with a hybrid water cooled one to get better temps and higher clock and quiet pc. I had this issue my self and thats how i solved it and now my gpu temps never go above 38c underload while and its so quiet :-D you can check my build to know more . Nice looking pc you have there
Thank you, that was really helpful:-)
Cant wait to see benchmark results :-D
Nice build. One suggestion is to move the gpu radiator to the top and replace the fan with two good and silent static pressur fans push pull because the original one is loud and horrible. I did that with the same gpu and using the same case and gpu temps while gaming never go above 38c. Check out my build photos and see how I mount it if you are interested:-D
I did build in the h200 my self and used three different gpus 2 were air cooled and one water cooled. Both air cooled were hitting high temps specially my msi gtx980 ti reached 83c and started down clocking and fans were very noisy.
So i sold it and bought a used evga gtx1080 hybrid and fixed two good static pressure fans on the radiator push pull and now gpu temps while gamine never go above 38c and its quite while room tempratue is about 24 to 25c.
My advice if you are interested on building in the h200 is go wii a water cooled gpu. Cpu temps are fine with a good tower cooler. You can see my build. Hope this helped
I know that the radiator tubes look ugly and i know a good solution but i will have to remove the ssd from the front to the back of the case which i think iam going to do soon
I used the same case for my build and i do understand how difficult it is to do a good job with cable managment on the back but your build came out looking good man, congrats :-D
No there wont be enough space to do that. If you want push pull its wither front up or i think you can do it on the back but in my case there is the cpu tower cooler so back is not an option for me.
good point,i have tried that but the problem is that at the bottom i have an ATX size PSU and a 2TB HDD sitting just in front of the psu and alot of cables. so moving the radiator down is not possible. :-D
Thanks. Its a phanteks magnetic white led strip :-D