Where are the desk pics ? I like this.
Do you notice any sagging of the panels after the build ?
Noctua and no rgb !! This is the way.
Plot twist - poster is a simulation too !
I like it !
Embrace the noctua !! What’s up with the black square covers ? You gonna get the black fans when they come out ?
Love it !
What ? Sort of the point of a window.
Looks great, with both coolers. Cant stand RGB either, but I do like a white lights, because to me its like showing off gems in a museum case.
What did you use to stress your GPU ? Temps are 72c ? What fan RPM ?
Great, thanks. I think I will pick up one of these when they're available again. I love the noctua fans on the GPU.
Nice, found it after I asked.
Are your cables a custom length ?
This is slick, where do you buy a dancase ?
Ok, cool. All your open bench builds....do you turn on the PC by shorting the jumper header if there inst a dedicated power button on the MOBO ? Or is there anything else you use to make it easier ?
Is that a jarvis frame ? What top is that ?
Has coil whine been an issue in any of your more silent builds ?
Anti-RGB ! Plus 1 !
Do you have more pictures ?
What is your fan RPM at max load on the GPU ?
Ya, but the size of the case probably makes little to no difference .
Coolers mounted this way trigger me. lol
I always think of the red comet too, when I see those TR fans. ;p nice build.
Right on, you just running it stock, what are you temps like ?
Looks good, why not a bigger air cooler though ? That case can fit all of them.
Feng shui, very nice setup. One of those new noctua chromax coolers would look pretty sick in there.
Very nice ! Could you of fit a 25mm fan up top instead of the 15mm ?
Your cooler is upside down and your exhaust fan is backwards. :)
Right on. My mobo died so I went to a Define S2. I went for the bare metal with black pads too, like yours. I think it looks better.
Then my 2080ti FTW3 was waaaaay to loud and hot even with the raijintek morpehous. I have an external rad now.
Super clean, great job !
That wallpaper is loud !!
This looks great ! no RGB either :)
What I do with the cpu fan cables is connect a single pwm cable to the cpu header run that through the top grommet and run the fan cables through the grommet and hook them up to a y splitter in the back. That way it cleans it up in the front and its easy to mess with in the back.
My previous mini c build was similar to this, but check out the rajintek morpheous on my build. You may or may not like it, but I think it wold look killer in your build.
Clean ! What sorta projects you do in your freelance?
Got any pics ?
Did you use it in that other build you have posted ? I didn’t see it.
Ps some loser is downvoting most of these comments so I canceled that dolts vote out. Probably an RGB’r.
This build is soooooo cool ! Maybe cause I own a mo-ra3 too ? lol. Why did you down size ?
Ive been wanting to go back to ITX, but I need at least a third pcie slot for the pass through and some cases have it, but not all can fit my psu and gpu length. Before all that I wanted a open itx case, this is sorta a hybrid of them both.
Haha, well then there is more than one space case in the room ! ;p
This looks great. This is how you tastefully deploy lights in a build I think.
I like the theme. I think a tinted panel would make it more "spacey".
Right on, Does he always say that or something ?
Looks good mate. I would upgrade your case air flow though. Those stock nzxt fans dont cut it. 2 140mm SW3 high speed at the front and 1 120 sw3 at the rear and you got it ! ;p
What ? No you didn't. That is the only subject and point you made. Look up the definition of digress. :)
Looking good boiiiieee !
The cooler comes with stock noctua color NF-A15. He bought 2 NF-A15 "CHROMAX" fans - which are the black versions. https://noctua.at/en/products/fan
mo-ra3 420 unite !! I have one too - haven't made a new build post though..... It's the most simple end game WC setup. I am using a pcie passthrough in my define s2. Where is your loop coming out from to connect to the rad ?
Personally, I do not like the RGB, but great build and overall setup non the less ! :p
Your intake and exhaust fans are backwards.
Clean ! looks very nice. Been seeing more of those scythe mugen coolers recently. One of the best 120mm air coolers out.
Nice, almost identical to my mini c build. Unfortunately the Morpheus isn’t enough for the 2080 ti - 83c with 2000rpm noctua fans - sad :(
I’d take stock noctua fans over any rgb build too.
Aw that sucks. I upgraded my psu too from a 650w to 1000w for the 2080ti and future cpu upgrade. Glad I did cause I’m running the 500w xoc bios. ;p
When I used real bench it only pulled I think around 275w. Which is around what batttlefield v uses. I think superposition is free, run that 4k optimized and see what your temps are at 100% fan speed. I'm curious.
Download hwinfo64 and have that running and after a bench or gaming session you can see the max everything was at.
I like the way PX1 looks, but it was so buggy for me. Fans randomly ramping up for no reason, and it could never decide which settings it wanted to save. Sometimes power, sometime fan speed, sometimes OC. I use after burner now, but that's because I don't have any fans, so your kinda stuck with PX1. Maybe its better now though.
Use a benchmark like superposition or time spy extreme, or the witcher 3 to get your GPU to max wattage and set your fan speed to 100% to see what your max temp is. For me it was like 83c, which is ridiculous for having the biggest heat sink. Not everyone had temps as high as me, so I don't know whats up. I even put a rajintek Morpheus with 2000rpm noctua fans and still had the same problem.
I didn’t see any in the pic. And wouldn’t really count the GPU, not like you can buy em without some sort of lights anyways.
I actually have the same GPU, but I blocked it because mine would get in the 80s at 100% fans speed. I see your gpu temps, what fan speed is that at ?
FD, noctua, no RGB +1