thank you for watching it. Good luck to your build .
Most or these channel boards are made of the same materials, very good QC control, so don't worry about it.
Hello, Specncer, please be aware of that, the water distribution channel board is used for simplified your loop system, it does not contain plenty coolant for some special cases, like if you only one radiator, then you should consider whether you have enough coolant to flush the whole system, otherwise, your system is been cooked. Hopefully, I am answering your question.
Hello, those RGB panel pictures were provided by the owner, I re-designed and printed it out. I won't sell them due to the owner's copyright. I can make something different RGB panels for you if you have the pictures. Or, I could design some special panels for you.
I recommend you buy it from eBay, I paid $45 for this CPU block.
The bending tool can be found as below: https://www.amazon.com/XSPC-PETG-Easy-Bending-Tool/dp/B016B29ST4
Hey, Cob, I used a XSPC bending tool, I also used a three-way level and caliper to make it precise.
The bending tool can be found as below:
Yes, it is a flowmeter or flow indicator.
Again, everyone can do this work, nothing special, I like building PC.
Love u +3000
Thank you very much!
Thank you very much !
Unfortunately, I only have the blueprints about these pictures, too me a month to do the design works.
You are welcome, let me know if you want more detailed info, I'd like to share the way to build this PC. I gonna have a captain America coming this coming Fall, I am still doing some hand skectch works on it.
360+240 rads. with sandwiched fans, CPU 48C+GPU 42C after 24-hour stress testing.
Love you +3000
Everyone can build such a PC, not that hard, it just needs more time and patience.
Thank you for watching it, much appreciated.
Thank you very much!
Yes, you are right, Moose, it is BA cpu block.
Here is the website that I ordered from it.
Pepper loves you too.
Thank you for watching it .
Yes, sir. I did.
here you go
TT Riing Plus H12, the related website has provided as above.
Actually, these pictures were taken by my friends, my iPhone 8 does not do a good job on any pictures.
Thank you for watching this. Much appreciated.
Sorry, this is the second time I post pictures in here, I will make more pictures and detailed information about this chassis. Thank you for watching it.
I used a level and caliper to do it. 3 failures in total but did it in 3 hours.
The whole cooling parts cost about 850.
So the total cost for the whole chassis is about 5000 USD.