took it to microcenter and they said it was the motherboard, luckily i had the 2 year extended warranty so they replaced it for me
Thanks I plan on going up there soon with everything and having them test the cpu an motherboard to see what’s up. I don’t wanna drag this out any longer lol
i did cmos and nothing happened, next i tried to trip the power by using the screwdriver like you said and the computer did not start up. i have a warranty at microcenter. so i will take the motherboard there and see if they can figure something out, but i think its the motherboard since i have checked everything and tried everything everyone has said to try and the cpu pins are fine. the motherbpoard shows the normal power off colors even when using a screwdriver to try and start the computer. thanks for the replies, i now at least know how to properly trouble shoot this if i ever need to check and see if a cpu or motherboard went bad. im gonna go crazy if i replace the board and it still wont start
appreciate the reply but i checked and the ram is fine
Yea the power switch on the front doesn’t respond, well Basiclaly when I hit the power switch on front panel the computer does not turn on anymore and nope, I didn’t touch the panel up cables when I took the cpu cooler off. Correct the Asus led are always Orange when the computer is off but when you cut it on they light up another color normally. But now they don’t change colors nor does computer turn on.
i just took out cpu and mother board cable and put them back in, its simi modular psu. the computer still wont come on
oh yea lol i just call the mobo the 24 pin and the cpu cable the cpu power supply. i have cut the switch on and off and watched it stay lighted orange to show the mobo is getting power but when i cut it on nothing happens and the mobo colors dont change either. i don't hear any noise or clicking sound either when trying to cut it on. by reset you mean just unplug and replug the cables? i have put the parts list in the description
whats eps? i am going to make a parts list in a second and post it here. no i did not remove the motherboard. i only took off cpu cooler in the beginning and took the silcon power ssd out and put the crucial ssd in its place. once the computer cut off from me not plugging the cooler back in after installing it. i took out the ram and reinstalled them multiple times, i took out the mobo battery also. and i just recently took the cooler off and cleaned the excess thermal paste of the side of the cpu. and so just make sure all cables in the power supply are plugged in or are you saying take them out and replug them?
So I just tried it and there was some thermal on the side of the cpu so I cleaned that off but only in the side. I did not remove all the thermal paste and rely onto the cpu. I checked and none of the pins on the cpu were damaged. Attached the cooler back, took the ram out n put it back in and nothing. The motherboard still shows the same colors as if it’s off. And the computer does not. Cut on
There’s some thermal paste on the cpu cooler part that pushes air. But not a lot. Just a little from when it moved as I was trying to lock it in. So your saying 10 secs of the computer bring on and the cpu not having a cpu cooler to cool it off should not have killed the cpu even after it shut down on it own. And that I should check the pins n see if they got damaged in the process on the cpu or motherboard? N lol i wont replace battery
The computer was only for 10 seconds before it cut off from the cpu cooler not being plugged in
The computer only was on for like 10 secs before it cut off from the cpu cooler not being plugged in
most definitely, I am getting them 16gb ram. and i was thinking about the 3400g but i dont think they really would need the 3400g. they don't do anything extra to make them need that. but it would be great for making sure they are good for 5 years with no issues
do you know of a bigger case with a optical drive?
appreciate the help
thanks and so since the most they do is watch youtube videos and use microsoft word/excel the 2200g or 3200g if its better will be all they need with no rx 570 or 560 right?
These aren’t on qvl for crosshair but they should work fine
Benchmarks from this build Radeon Vii/Ryzen 2700x computer build Benchmarks
Time stamps in video description and 2 minutes in I believe is where benchmarks start
What site are you using to shop on or were you saying you can find the ram on here? and I don’t use discord
Push come to shove you can use the original ram you had instead since it is cheaper.
Was the one I finished for you earlier to high?
Smooth, now maybe I can keep this 6 years down the line when 8k cameras are cheap
PCPartPicker part list / Price breakdown by merchant
I added cheap fans since, I learned cheap fans perform just as good as expensive fans. I took out the cooler since the 2700x comes with one and mines works great. But if you wanna add a cooler then get the mugen b. I added a extra 1tb drive to give you storage to add things like games or movies. I put the Radeon VII to pair with the 2700x. Once you adjust the Radeon to your liking it works great. A simple click to autoundervolt will do you fine. Any other questions. Let me know but I would some where along this
I agree because and constantly improves the drivers. It doesn’t bother me if they don’t though, because the Radeon VII should be able to handle my workload with ease for years. So I’m in the same boat. I prefer cards to last multiples years as well. I don’t care if I spend 200 or 800. But the Radeon VII has been Nothing but awesome for me so I’m enjoying it and will most likely keep it until it goes out u til 3-4 years from now something comes out with a 50% increase in performance. I wonder why people don’t mention what you said about Amd cards being better a year or two down the line.
I put vegeta in the middle to be the middle man telling the joker and Batman to chill or he would step in and we all know neither wants that lol. But I doubt anybody else was thinking that when they look at my pics
Yea I sent the amd one back and got the xfx instead as there’s also comes with a 2 year warranty and they have great service
Right the Radeon VII is a good buy over the 2080. 1080 ti is the next best thing if you can find it used though. Doesn’t that finewine just deal with amd updating the drivers to be better which helps the cards perform better over time
I hit auto undervolt and i didn’t notice that much of a noise drop. But maybe that’s me. It crashed playing apex while on auto undervolt. So I just did a small Manual overclock and the noise can be heard but i ignore it. I may try again to over clock it I just need to find the best setting for my Radeon VII. Looking at his video he dropped down to 990. Which is why his was quiet. Which is what I may have to try and see how it works on mine, because I don’t honk auto undervolt went that low
Thanks, I put my all into it. Going over my original budget of 1500$. To make sure this can do what I need for 3-5 years.
It is on par with a 2080 when you adjust it or overclock it. And in some things it’s better. It seems every time they put out updates it gets even better. I went with it since I felt the 2080 was a waste of time since it’s a 1080 ti for 800. And it turned out to be a great gpu. My FPS on my 60 hz monitor. Check reviews on YouTube from like (not a apple fan) he gave multiple updated reviews on the Radeon VII. Started out hating it but now he loves it and calls it a overclockers dream. So on a 4k 144hz monitor it would be even better. I put benchmarks pictures up but on eveage in fortnite I can do over 60fps in 4k on apex it varies sometimes around 40-50 and sometimes I can get anywhere up to 100 FPS in 4k. Rendering in davinci it’s a breeze. 10 min 4k video rendered in 14 minutes and a 10 min 1080p video rendered in I think like 4 and half minutes. So to me yea it’s great but I was using a basic hp desktop from 2014 and it had dedicated graphics lol. I recommend it to people looking to upgrade but if you don’t really need to up upgrade you can wait until Navi and decide then
Yes it is vegeta
pretty good so far. i did a small overclock boosting it from 1802 to 1911 and it works fine. even at stock 1802 it was good. kills anything i throw at it for rendering and gaming. but 4k gaming is where you see frames range from 40-90 maybe 100 if im lookin into the sky or there is barely anything in front of me. if you was wondering if its worth buying then I would say yes.
lol funny you mentioned him, because he is who inspired me to use the funko pops
you have to get alerts, for example newegg had one in stock like 3 times yesterday or sunday even though the price for that version jumped to 799.
i stalked it lol. bought it from amd and then had issues which may of been on my end and returned it then i bought on newegg the xfx version. you just have to be on the look out and ask to receive notifications when its back in stock
So it’s good that it hits 100 on loads while gaming?
Right so basically it’s fine?
I’ve got the phantek enthoo pro. And 850 w g2 psu. I hooked everything up with no issues . So wierd and thanks for replying fast
Agreed lol luckily prime delivering the new ram tomorrow so I’m
Sure I will be sending the card back for replacement this week. Only thing that sucks is amd saying it takes a week to get a new card
I couldn’t find the code. Nobody from amd or Asus new what the motherboard code PO meant. And said they think it might be what others was saying which. Is that the ram doesn’t work with the motherboard. So we shall see but idk, that struggling sound from the card had me to nervous. Yea dude from Asus wasn’t that helpful but and tried everything but I probably still will have amazon give me a new motherboard just to be safe and send amd the card for another one. I did though have ram that want on the crosshair qvl so this time I got some that’s coming tomorrow and hopefully that works. But whether it does or do I still think like you said that’s it’s best to just get new mb n card to be safe. I really don’t get how that the card sounded like it was struggling to start when I put it in the second pcie slot to test if it was just the first one that was bad. This is what really got me like that card Might b bad
Yea but the crazy thing is amd Asus said it’s not the motherboard but amd. Amd say it’s the ram so I gotta buy new ram n text that and if that don’t work then amd said call them back
My AMD Radeon VII came today and it don’t even work. Lol causing the crosshair to show code po n Asus don’t even kno what that mean. So they claim it’s the Radeon and now I believe them. I put the card n anothe pcie slot n it sounded lik it was gonna die
awesome. do you know any other free programs to test it with to
so i would launch that and adjust setting in the application and just run it for a hour or two and see how it does?
how would i do a good stress test?
nahh i don't overclock. and i was just worried about it since the extra 2 years warranty seemed nice, cuz you see from time to time people say they card went dead after a year. and i was worried about that happening to me