add arrow-down arrow-left arrow-right arrow-up authorcheckmark clipboard combo comment delete discord dots drag-handle dropdown-arrow errorfacebook history inbox instagram issuelink lock markup-bbcode markup-html markup-pcpp markup-cyclingbuilder markup-plain-text markup-reddit menu pin radio-button save search settings share star-empty star-full star-half switch successtag twitch twitter user warningwattage weight youtube

Comments

Comments

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Not really....why?

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

The one I got in my room when I moved in. I'm planning to buy an autonomous one: https://www.autonomous.ai/?slug=diy-smart-desk-kit-electric-sit-to-stand-automatic-frame&modal=5

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

When did I buy it? End of November aprox, why?

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

I read it could manage 3200 "without" problems, and so far it's been going quite ok I need to say.

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Not sure if I would rather invest the money in an extra 3rd screen ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

hi! No no, the 5 ones at the front are taking air in, and the 2 on top and 1 on the back are tacking air out!

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

That would be the scheme to follow:

https://i.imgur.com/sysbXH6.jpg

In my case I finally decided to buy 3 extra HD fans and then plug them all to one RGB controller (in case you have HD+SP fans, you have to use 2 diferent RGB controllers).

I controll everything through the Commander Pro + Corsair Software (which is really easy and nice I need to say): Fans speed, colors, temperatures, PSU power... I've just the water pump plugged to the Mobo cause as it isn't a Corsair product, it can't be controlled by the Commander pro.

(I'll update the scheme and repost it here and also add it in the picture).

Hope it helps ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Sure would!

Im really looking forward to test it with a new project!

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

They are, and so am I ;)

I even have my "Barça themed" preset ready for when we win a title this season ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

THANKS! ;)

I planned it for quite a lot of time and hellp from many users and forums.

Thanks a lot for your comments and help PCPP! ;D

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Thanks man ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Thanks! I invested some time in it ;)

Try with something like this, it really helps ;)

http://www.conectalo.com/product_thumb.php?img=images/IC/KO9379.jpg&w=250&h=140

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Thanks man ;) I planned it for quite a long time, and when I saw the Threadrippers I said...now is the moment!

At the moment the 3 at the front + the 2 of the radiator (total 5) are pushing inside, and then the 2 on top + 1 at the back are pulling out. You think it would be better to turn the on on the back to pull air in for exemple?

Thanks for the info ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 2 points

Looks like and I hope so! CPU hunger is what I need ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Long life for the G13! How long has it been in the market? And still no succesor! Really good to be improved! (even if it could be already). Thought for playing but really good to set as a drawing tool for CAD

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 2 points

Thanks to you ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Thanks bro ;)

Actually I would say it isn't that bad, because it comes with many places where to attach all the cables, but yes...you see the cables, can't really hide them all the way. It was chaos with the amount of cables the RGB fans have, but as said, with some patience and "roll" management cable it has come pretty good I think ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Thanks ;)

I might consider it, but do you think it also makes a difference for a production workstation? Isn't that more for gaming? (even if I also game, it isn't the main aim for this build)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Thanks ;)

As I commented before, I wanted to have all the RGB and profit from the ones coming with the cooler, and I thought this was the best config ;)

Yes I think this is really THE processor to have fur such a job ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Thanks! I'm even considering a third...but now this model isn't anymore in production (there is already a substitute for it). Can't never get enough space for working while rendering+adjustments+3d model+PS+etc... For me it works fine, I guess a 144 one would make a difference, but I'm happy with them ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Thanks! ;)

It really was a mess when I first mounted the fans to test if they worked... But then with 2 well invested hours and some "roll" cable managment, was able to get it pretty clean I think ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 3 points

I hope it can rip my renderings in 1/4 of the time it needed before ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Thanks! I wanted to have all the RGB fans but also wanted to profit from the ones that came with the cooler. So I thought it would be a good idea to use them in push pull on top, and leave the one below blowing cold air to the GPU ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

One I've got with and OCB purchase hahaha! Might not be the nicest but it comes with the palmrest and it's really comfy. Do you know any well konwn brand that produces something similar with palmrest and nicer? (which isn't difficult to be more...)

Thanks!

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

That was the aim, and so far I haven't been able to really push it with heavy work, but it really feels like it's gona be more than capable of it ;)

Thanks!

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Thanks for your comments!

I've been using already amd overdrive but I feel more comfortable directly in the BIOS. I'll try the 1.25+medium/hich LLC and see what happens with it.

Shame that you also had problems with it... But it will usually stay more than 2h if it's rendering, I don't usually stay that long when playing. (Guess it's gona have to be a heavy scenario if it could manage the ones I did before in less than an hour...)

Thanks ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

I'll try that too thanks ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 3 points

I really appreciate your help!

I did buy the 4 module package in order to avoid this kind of problems so I guess it shouldn't be the incompatibility between the modules. Thats the one I've got: https://www.newegg.com/Product/Product.aspx?Item=N82E16820232623&cm_re=flare_x_quad-_-20-232-623-_-Product

I'll check the thread you posted and see if I can find what they discuss about this "QVL" (which I've never heard of :S).

Thanks ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 1 point

Actually it's pretty stable at 4 GHz (it passes: blender, cinebench with normal average score and wprime). BUt the other day crashed after 1h playing assassins creed. I'll retry now with new drivers. Don't want to push a lot the Vcore as 1,35 is the max recomended from AMD.

Memory timmings work fine since the first day I setted them at CL14 ;)

Problem is...CPU-Z Only recognizes the memory as Dual channel, and not as Quad. I followed the user manual and the ram modules are in the right place :S Shouldn't it be automatically recognized as quad ? Or should I set something in the BIOS?

Comment reply on F2a's Completed Build: The most expensive headphone stand that games. Or, smallest gaming PC I can build.

  • 24 months ago
  • 2 points

Nice set!

Is this in autonomous standing desk? ;) https://www.autonomous.ai/

You happy with it? I was looking to buy one for my new set! https://pcpartpicker.com/b/2WzYcf

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 5 points

Aha! Done ;) Thanks for the explanation!

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 3 points

English isn't my mother tongue sorry :( What do you mean by featured? ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 2 points

It's a good one eh? ;)

Comment reply on t_and's Completed Build: Threadripper Workstation - Rendering + Picture edit.

  • 24 months ago
  • 2 points

Around 30°C in idle. With a small test I did with an OC@4GHz and 1.35 Vcore, it got around 60° with Prime. Quite OK no? The cooler isn't almost impossible to hear and works perfect ;)

Comment reply on Sqiggleyjeff's Completed Build: I need a bigger desk now

  • 25 months ago
  • 1 point

Nice set! Im building one in a X399 Aorus too, and I'm wondering if it's necesary to fill both 8 pin and 4 pin cpu connectors? Wouldn't it be enough with the 8 pin one?

Thanks

Comment reply on Rubyfox2k's Completed Build: Adopting the Threadripper platform

  • 27 months ago
  • 1 point

Where could you find the F4-3200C14Q-32GFX (Black) Rams? Can't find them...Are they only available in newegg?

Just to know, are those specifically thought for Quad-channel? Because of the "Q" ?

I'm wondering if 2x F4-3200C14D-16GFX (Blue) would do the same job?

Comment reply on Shotta06's Completed Build: "The Ripper" First build since 2010

  • 27 months ago
  • 1 point

Good to know thanks ;)

What do you mean as not having "boot drive I.E Flash Drive" ? A USB?

Comment reply on Shotta06's Completed Build: "The Ripper" First build since 2010

  • 27 months ago
  • 1 point

Nice build! I'm planning on buidling something similar.

You happy with the Mobo? Are BIOS a but more updtated by now?

And as for the cooler, getting good temps?

Thanks a lot ;)

Comment reply on xnightcrawl's Completed Build: Threadripper 1950X Build $5,050.76 before taxes and shipping cost: 1st build in 10 years

  • 27 months ago
  • 1 point

I'm also planning on buying that one because of being the only one that covers all the surface. You happy with it?

Comment reply on d4rkdpg64's Completed Build: Ryzen ROG H20 Build

  • 27 months ago
  • 1 point

Did you have any problems with the RAM? I heard this is the best module for Ryzen. I guess it's also then the best for threadripper? Thanks.

Comment reply on iceanddice's Completed Build: Dracarys! - Prologue edition

  • 27 months ago
  • 1 point

Good to know! Thanks

Do you only have the radiator in "push mode" with the HD120 fans in the front? Couldn't fit it on top?

I'll be attentive ;)

Comment reply on Rubyfox2k's Completed Build: Adopting the Threadripper platform

  • 27 months ago
  • 2 points

Congrats for the build!

I wanted to ask you though, have you had any problems regarding cpu temperatures? Because of the kraken being smaller than the chip size. Or is everything working fine as stated in many places online?

Thanks and enjoy ;)

Comment reply on iceanddice's Completed Build: Dracarys! - Prologue edition

  • 27 months ago
  • 1 point

Nice build! Quite jealous need to say ;)

I wanted to ask you though, have you had any problems regarding cpu temperatures? Because of the kraken being smaller than the chip size. Or is everything working fine as stated in many places online?

Thanks and enjoy ;)

Sort

add arrow-down arrow-left arrow-right arrow-up authorcheckmark clipboard combo comment delete discord dots drag-handle dropdown-arrow errorfacebook history inbox instagram issuelink lock markup-bbcode markup-html markup-pcpp markup-cyclingbuilder markup-plain-text markup-reddit menu pin radio-button save search settings share star-empty star-full star-half switch successtag twitch twitter user warningwattage weight youtube