PCPartPicker

  • Log In
  • Register

Comments

phil.harmoniq's Completed Build: Meshify C - First Ful Custom Build

timbermaniac123 2 Builds 1 point 3 days ago

or he can buy slim book shelf and put the rig on the top of it

tretton14's Completed Build: My first build

timbermaniac123 2 Builds 2 points 7 days ago

ahaha, he was having an imac. so it was natural for him to take picture with only the monitor.

kemsprite's Completed Build: Amd Second Gaming Rig 2600 16gb ddr4 rx 580 8gb

timbermaniac123 2 Builds 1 point 9 days ago

Maybe. In this setup. Your gpu doesnt get cool air from the fan. Because air tends to move upward.

IgniteRainbows's Completed Build: Monochrome Monster

timbermaniac123 2 Builds 3 points 9 days ago

Em ?? Invisible parts ? Where's the finished build photo ?

kemsprite's Completed Build: Amd Second Gaming Rig 2600 16gb ddr4 rx 580 8gb

timbermaniac123 2 Builds 1 point 9 days ago

Why only 1 fan in the front ?

Zongy22's Completed Build: First pc build by 13 year old

timbermaniac123 2 Builds 4 points 13 days ago

Maybe it's his parent's money. And maybe he asked someone to help him build it.

We can't really know. Since couple of days ago. Someone claim bitwit's build into his own.

ekidikid's Completed Build: Kristal

timbermaniac123 2 Builds 1 point 17 days ago

prime95 with smallftt or blend ?

Iannis's Completed Build: 4K Christmas Tree (editing pc for my grandfather)

timbermaniac123 2 Builds 5 points 18 days ago

Plot twist : it's the grandfather build for his grandson

Abdulkadir's Completed Build: Entry level gaming rig

timbermaniac123 2 Builds 3 points 18 days ago

Haha.. Yeah man, entry... For 90% of this community, this setup is considered high end.

LCL_Top_Gaming's Completed Build: $10,000 ROG Mayhem

timbermaniac123 2 Builds 0 points 22 days ago

Ahaha, man. He has no shame. But, he didn't mention that he was built it also.

dirka's Completed Build: New main Plexer

timbermaniac123 2 Builds 1 point 23 days ago

Haha, you never know, there was a build i think couple of weeks ago where he spends 1100$ just for the fans.

MaliciousKen's Completed Build: Malicious Returns

timbermaniac123 2 Builds 1 point 24 days ago

Hahaha, i am not sure if it's a compliment or not.

harloddoyal's Completed Build: AMD Threadripper/NVIDIA Geforce 2080 Ti Beast

timbermaniac123 2 Builds 1 point 25 days ago

or he could buy another case with seperate psu compartment.

jgarton86's Completed Build: First PC Build (AMD Ryzen 5)

timbermaniac123 2 Builds 1 point 26 days ago

I was bout to say nice color of the sleeving cable. But when i click next picture, my reaction was "ah....."

kevosaurusrx's Completed Build: Financial Mistake - 9900k + 2080ti

timbermaniac123 2 Builds 4 points 26 days ago

It's not financial mistake if you can't get 60 fps 4k with RT ultra on Minesweeper.

timbermaniac123's Completed Build: Third Build - Minor Upgrade

timbermaniac123 submitter 2 Builds 1 point 26 days ago

You can use 20 pin extension or get 20 pin male to 9 pin female usb adapter. I use the second one since no one in my local market sell 20 to 20 pin. But i believe you can get 1 by ebay.

GPU temp when playing around 75-78 full load. But that's msi armor. 2080ti can do better since it has bigger heatsink.

CPU temp with stock wraith is very good. Playing games around 60. Since ryzen idle's temp is quite high enough around 40 to 50. Rendering gets 80c. Prime95 around 87-90c.

Yeah, you will be fine with that fan configuration. But if you use open card, i think you better put aio in the front and the front panel can only support 240 aio.

swarmara's Completed Build: Nuka RGB

timbermaniac123 2 Builds 2 points 26 days ago

i think you could use better cpu cooler since you have big case

Boom_OG's Completed Build: ThreadRipper Holiday

timbermaniac123 2 Builds 2 points 26 days ago

nice monitor stand

TheKusari's Completed Build: Compact RGB Threadripper Rig "Arklight" (w/ Peripherals)

timbermaniac123 2 Builds 1 point 27 days ago

i love corsair. If only corsair made their own board and gpu. I would buy it instantly.

Zoth's Completed Build: Fractal Define R6 Black/White with Noctuas

timbermaniac123 2 Builds 1 point 27 days ago

and... puff the rgb ram gone in the second picture :D

SirMints's Completed Build: Titanite - LOUQE Ghost S1

timbermaniac123 2 Builds 1 point 1 month ago

I was about to order the silent red one. But it's not available anywhere in my country. So i will stick to romer g tactile for now until it break. I love how compact it is and still have the essential keys for autocad.

I think you should check Tai-Hao Black Lilac Gray / Tai-Hao Dark Knight. It's not expensive, but still abs double shot not pbt.

ThxAndBye's Completed Build: Louqe Ghost S1 gaming build

timbermaniac123 2 Builds 1 point 1 month ago

Romer G, master race ! Please don't get triggered. Just kidding.

It's nice that you can build your own custom board. I know it's an expensive little hobby.

Someday i will try to build a lubed silent red. Because my wife keep complaining about how loud my romer g tactile switch. Or maybe, just get a new "mancave" room.

SirMints's Completed Build: Titanite - LOUQE Ghost S1

timbermaniac123 2 Builds 1 point 1 month ago

Vote for the vortex race 3 ! Now is time to customize the keycaps. Which switch did you pick ?

meecoooooool's Completed Build: idk what to title this

timbermaniac123 2 Builds 3 points 1 month ago

"school work" in 60 fps sure is good

qwerty512's Completed Build: Custom Re-Build (June 2018)

timbermaniac123 2 Builds 1 point 1 month ago

Well, he said it clearly on pending.

KaptainKris1's Completed Build: Blue Blizzard - Winter Gaming/Workstation Rig

timbermaniac123 2 Builds 2 points 1 month ago

Yes, it's just a waste to throw money into b360 when he has great cpu and gpu.

Showgenz's Completed Build: My first build ryzen 7 2700x.

timbermaniac123 2 Builds 2 points 1 month ago

You can do better with the cable management. Reroute all the cables through the back, i guess it can fit all the cables in the back since the psu have flat cables. 24 pin cable through the gourmet rubber.

And yes, i can say the same about the monitor and gpu. But since you are planning to get better gpu next year. 1070ti will be the best value for performance. 2070 is a good choice too, since we have seen that there's a good potential of RT performance in the last BFV update.

Allan0223's Completed Build: My Goddess of POWER!

timbermaniac123 2 Builds 2 points 1 month ago

Haha, i see. You are already planning to change the board. Good. I hope your ram use samsung b-die, so you can OC it to 3000.

Saabaru300's Completed Build: Mid Range 2600/1070ti Micro ATX Build

timbermaniac123 2 Builds 1 point 1 month ago

Ah a fellow 280x user. I have the same problem with msi card. But i'm able to push the power cable flat so the panel can be closed.

I was about to get the same board and same color as you. But my wife told me to get the black one.

Great build. But that fans cabling is really disturb my ocd. Hahaha, you can route the sys fan 2 cable through the rubber opening above the ram. And for the front fans, i guess you can tape it to the corner

Allan0223's Completed Build: My Goddess of POWER!

timbermaniac123 2 Builds 2 points 1 month ago

The airflow is really messed up.

You should add 2 front fans as intake. Rear (near cpu) & top (above cpu) as exhaust.

Above ssd is not needed. And on the bottom, you should change it to intake. As for now, you don't have cool air supply for your gpu.

And why would you choose c7 cooler, instead of tower cooler like h7. I think this case have clearance for tower coolers. Edit : ah i see, you have c7 already from the previous build.

You can't do much with the ram on those board. Since it's bottleneck already. That board support 2133 and your ram is 2666. Maybe if you can overclock your ram, it would work with 2666. But if can't, you should underclock it to 2133 mhz.

Next upgrade suggestion : add 1 ssd for os drive. 120gb should do the job.

Andree_Z18's Completed Build: Jack's got his Christmas

timbermaniac123 2 Builds 1 point 1 month ago

I bet it will look cooler on black case

roufdrapht's Completed Build: Got hit by a car, and they gave me cash so I wouldn't sue

timbermaniac123 2 Builds 3 points 1 month ago

shout in wheelchair yahooo, game is love, game is life.

aznsniper911's Completed Build: My Last Build As A Single Man V2

timbermaniac123 2 Builds 2 points 1 month ago

For some of us. Those fans price alone can be used in the next build in the next 5 years.

But what can i say, rgb is love, rgb is life.

aznsniper911's Completed Build: My Last Build As A Single Man V2

timbermaniac123 2 Builds 12 points 1 month ago

There is a wise saying "happy wife, happy life" but in this case,we know it's an excuse to justify the purchase

aznsniper911's Completed Build: My Last Build As A Single Man V2

timbermaniac123 2 Builds 2 points 1 month ago

Next, the first build as a single dad ! Just kidding, as an awesome dad.

kloddant's Completed Build: MSI GT75 Titan 094 Upgrade

timbermaniac123 2 Builds 2 points 1 month ago

Ahaha. I was look at the built name twice to make sure. It is my first time seeing laptop at this site

_killshxt's Completed Build: My First Build

timbermaniac123 2 Builds 1 point 1 month ago

Yes. Get the splitter for the front fans. Bottom intake is not necessary but i will try to add 1 since you have 2 spares.

_killshxt's Completed Build: My First Build

timbermaniac123 2 Builds 1 point 1 month ago

I think, you don't need to change the mobo and cpu. As long you run it on stock, it's fine.

The memory's speed is just fine for photo editing and light gaming. but for workstation 16gb is not enough.

Actually it's a solid build after all. If you want to upgrade, upgrade the ram first. But check your mobo's ram limit. i think b360 boards only can get up to 2666 mhz.

You need to add 1 fan at the top as exhaust. Just 1 in the back is enough.

For cooler, liquid AIO sure will be nice. But h7 air cooler will do just fine.

jeramiepichon's Completed Build: First PC build (Ultra-wide Included)

timbermaniac123 2 Builds 2 points 1 month ago

are you drunk ? His intake is from the front and top. Exhaust on the rear

timbermaniac123's Completed Build: Third Build - Minor Upgrade

timbermaniac123 submitter 2 Builds 1 point 1 month ago

Yup the price is pretty high here in asia. But the after sales service is very good. I fried my motherboard in the first day because of my fault (badly physical damage) and yet they still replace it with the new one

CattyC's Completed Build: Current PC

timbermaniac123 2 Builds 1 point 1 month ago

You can try give it a shower for total clean up.

oWolfiezz's Completed Build: Black Friday $724 Beast

timbermaniac123 2 Builds 2 points 1 month ago

I think it's better to place the radiator on the front top. Front bottom to supply cool air for the gpu. And add more fan exhaust at the top will be better.

Challenger525533's Completed Build: Budget Build

timbermaniac123 2 Builds 1 point 1 month ago

But the question is, can the car run crysis ?

DeadpeopleRising's Completed Build: DPR'S Corsair 280X Build!

timbermaniac123 2 Builds 1 point 1 month ago

For fan case, i think LL will be doing just fine. For radiator, its a different story. If you haven't sold the LL, give it another try test the temperature. Otherwise, Halos frame will be good on noctuas

morevlips's Completed Build: Sexy boy

timbermaniac123 2 Builds 2 points 1 month ago

Solid choice of the hardwares. The motherboard can be better, but it will do just fine to run stock 2600

Same, i have ps4 as well. but hardly touch it . Thinking about selling it, but KH3 is too good not to be played.

DeadpeopleRising's Completed Build: DPR'S Corsair 280X Build!

timbermaniac123 2 Builds 1 point 1 month ago

you can try adding phanteks halos to that noctua

yuuaresokrul's Completed Build: Global Warming

timbermaniac123 2 Builds 7 points 1 month ago

Great Hardwares, but such a waste not to tidy up the cables management.

adriank91's Completed Build: Godlike?

timbermaniac123 2 Builds 1 point 1 month ago

So much for gaming and streaming only. This is more like pc for 3d production.

Parrima's Completed Build: Mid Level Build

timbermaniac123 2 Builds 0 points 1 month ago

But i'm pretty sure he just trolling with his title. Or just showing that he's some mid level rich man with his mid level build

Parrima's Completed Build: Mid Level Build

timbermaniac123 2 Builds 0 points 1 month ago

i believe, it's more logical if we measure it in price. Perspective is not logical and subjective.

Page
1